Abstract:The Cyclic CO2 capture and CaCO3 regeneration characteristics in a small fluidized bed reactor were experimentally investigated with limestone and dolomite sorbents. Kinetic rate constants for carbonation and calcination were determined using thermogravimetric analysis (TGA) data. Mathematical models developed to model the Ca-based sorbent multiple cycles of CO2 capture and calcination in the bubbling fluidized bed reactor agreed with the experimental data. The experimental and simulated results showed that file CO2 in flue gases could be absorbed efficiently by limestone and dolomite. The time for high-efficiency CO2 capture decreased with an increasing number of cycles because of the loss of sorbent activity, and the final CO2 capture efficiency remained nearly constant as the sorbent reached its final residual capture capacity. In a continuous carbonation and calcination system, corresponding to the sorbent activity loss, the carbonation kinetic rates of sorbent undergoing various cycles are different, and the carbonation kinetic rates of sorbent circulating N times in the carbonation/calcination cycles are also different because of the different residence time of sorbent in the carbonator. Therefore, the average carbonation rate was given based on the mass balance and exit age distribution for sorbent in the carbonator. The CO2 capture characteristics in a continuous carbonation/calcination system were predicted, taking into consideration the mass balance, sorbent circulation rate, sorbent activity loss, and average carbonation kinetic rate, to give useful information for the reactor design and operation of multiple carbonation/calcination reaction cycles.

Experiment research on CO2 capture from flue gases using interconnected fluidized bed reactors with Ca-based sorbent

A basic study on the nano CaO-based CO2 adsorbents in FFB for CO2 capture

Study on the kinetics of Ca-based CO2 sorbent of carbonation and calcination for adsorption enhanced reforming process

Experiment and Modeling of Co2 Capture from Flue Gases at High Temperature in A Fluidized Bed Reactor with Ca-Based Sorbents

Research and Development on Cyclic Calcination/Carbonation Reaction With Ca-based Sorbents to CO2 Capture From Flue Gases

Experiment And Modeling Of Co(2) Capture From Flue Gases In A Fluidized Bed With Limestone And Dolomite Sorbents

CO2 Capture from Flue Gases Using Three Ca-Based Sorbents in a Fluidized Bed Reactor

Process Analysis of CO2 Capture from Flue Gas Using Carbonation/calcination Cycles

Experiment of CO_2 Capture Based on Ca-based Sorbents Cyclic Calcination/carbonation Reaction

Experimental Research on CaO Carbonation/Calcination Cycles in Fluidized Bed

Experimental research and modeling of multiple carbonation/calcination cycle of Ca-based CO2 sorbents

Design and Cold Mode Experiment of Dual Bubbling Fluidized Bed Reactors for Multiple CCR Cycles

Synthesis and Performance of a Nano Synthetic Ca-based Sorbent for High Temperature CO2 Capture

Experiment research on CO2 continuous capture using dual fluidized bed reactors with supported amine

Continuous CO 2 Capture in a Circulating Fluidized Bed Using Supported Amine Sorbents

Numerical and Experimental Investigation of the Effects of Impinging Streams to Enhance Ca-based Sorbent Capture of SO2

Fly Ash-CaO Sorbents Modified with Chlorides and Hydroxides for CO2 Capture in High-Temperature Flue Gas

Steam Hydration Reactivation of Cao-Based Sorbent in Cyclic Carbonation/Calcination for Co2 Capture

Post combustion CO2 capture with calcium and lithium hydroxide

A green and scalable synthesis of highly stable Ca-based sorbents for CO2 capture