Abstract:The cyclic CO2 capture, transient phases change, and microstructure appearance of a new kind of Ca-based regenerable CO2 sorbent, CaO/Ca12Al14O33, obtained by the integration of CaO as solid reactant with a composite metal oxide of Ca12Al14O33 as a binder, were investigated by thermogravimetric analysis, XRD, and SEM at different preparation calcination temperatures. When the calcination temperature in the preparation stage is higher than 1000 degrees C, the cyclic CO2 capture of this new sorbent declines. The lowered CO2 capture may mainly be attributed to the formation of Ca3Al2O6, which decreases the ratio of CaO to binder in sorbent, and the severe sintering of sorbent occurs when calcined at such high temperatures in the preparation processes. These results suggest that the calcination temperature for this new sorbent should not be higher than 1000 degrees C in order to obtain its high reactivity. The performance of the new sorbent over 50 cycles was evaluated under mild and severe regeneration conditions, respectively. CaO/Ca12Al14O33 attained 41 wt % CO2 capture after 50 carbonation-calcination cycles under mild calcination conditions (850 degrees C, 100% N-2), and the results obtained here indicate that the new sorbent, CaO/Ca12Al14O33, has significantly improved CO2 capture and cyclic reaction stability over multiple carbonation-calcination cycles compared with limestone and dolomite under mild calcination conditions. When more severe calcination conditions (980 degrees C, 100% CO2) were used, the capture of CaO/Ca12Al14O33 decreased from 52 wt % in the first cycle to about 22 wt % in the 56th cycle; however, the capture of CaO/Ca12Al14O33 sorbent over 56 cycles is still higher than that of dolomite and limestone under the same severe calcination conditions.

Experiment of CO_2 Capture Based on Ca-based Sorbents Cyclic Calcination/carbonation Reaction

Properties of a Nano CaO/Al2O3 CO2 Sorbent

Modified Kinetics Model of Nano CaO Reactions with CO2 in a CaO-Based Adsorbent

Ca based high temperature CO2 absorbents for sorption enhanced reforming process

Study on the kinetics of Ca-based CO2 sorbent of carbonation and calcination for adsorption enhanced reforming process

Properties of a Nano CaO/Al<sub>2</sub>O<sub>3</sub>CO<sub>2</sub>Sorbent

Synthesis and Performance of a Nano Synthetic Ca-based Sorbent for High Temperature CO_2 Capture

Experimental research and modeling of multiple carbonation/calcination cycle of Ca-based CO2 sorbents

Experiment and Modeling of Co2 Capture from Flue Gases at High Temperature in A Fluidized Bed Reactor with Ca-Based Sorbents

Effect of Preparation Temperature on Cyclic CO2 Capture and Multiple Carbonation−Calcination Cycles for a New Ca-Based CO2 Sorbent

Different Sorbents in Calcium Looping Cycle for CO2 Capture

Carbonation Kinetics of CO2 with CaO-Ca9Al6O18 Sorbent

CO2 Capture from Flue Gases Using Three Ca-Based Sorbents in a Fluidized Bed Reactor

Modeling of the Carbonation Kinetics of A Synthetic Cao-Based Sorbent

Research and Development on Cyclic Calcination/Carbonation Reaction With Ca-based Sorbents to CO2 Capture From Flue Gases

Morphological Changes of Pure Micro‐ and Nano‐Sized CaCO3 during a Calcium Looping Cycle for CO2 Capture

Cyclic Performance Of Waste-Derived Sio2 Stabilized, Cao-Based Sorbents For Fast Co2 Capture

Development of CaO-based Sorbent Doped with Mineral Rejects–bauxite-Tailings in Cyclic CO2 Capture

Process Analysis of CO2 Capture from Flue Gas Using Carbonation/calcination Cycles

Steam Hydration Reactivation of Cao-Based Sorbent in Cyclic Carbonation/Calcination for Co2 Capture