Abstract:Biomass gasification based on calcium looping sorption enhanced reforming (CLSER) has the advantages of generating syngas with high purity hydrogen and simultaneously capturing CO2 in process. This study first aims to develop a novel synthetic CaO-based sorbent, addressing its tar reduction potential and mechanical strength along with cyclic carbonation reactivity. The novel sorbent was synthesized by integrating CaO with iron catalyst and an inert support based on a two-step sol gel method. Comprehensive properties of the novel sorbent including chemical components, effects on biomass pyrolysis and tar reduction, cyclic CO2 capture reactivity, morphology, and mechanical strength were examined by using various methods and facilities. The characterized chemical and physical properties were also compared with pure CaO and two referenced synthetic sorbents. Results showed that a novel sorbent (Ca-Fe-Al) consisting of CaO, iron oxide (Fe2O3), and mayenite (Ca12Al14O33) was successfully synthesized. Evolutions of tar species and CO2 during wheat-straw pyrolysis were found to be lowered in the presence of Ca-Fe-Al as determined by thermogravimetric Fourier transform infrared (TG-FTIR). The enhanced evolutions of light gases such as CO, CH4, and CO2 at temperatures higher than 580 degrees C examined by thermogravimetry-mass spectrometry (TG-MS) indicated the catalysis effects of Ca-Fe-Al on biomass tar cracking and char decomposition. Different from CaO and other synthetic sorbents, Ca-Fe-Al sorbent showed increasing carbonation capacity and reactivity with growing cycle numbers. After being hydrated, the cyclic carbonation performance of Ca-Fe-Al sorbent became superior to other sorbents. Mechanical strength of Ca-Fe-Al sorbent was also greater than that of CaO and was more suitable for long term storage.

Experimental research and modeling of multiple carbonation/calcination cycle of Ca-based CO2 sorbents

Experimental Research and Modeling of Multiple Carbonation/Calcination Cycle of Ca-based CO2 Sorbents

Properties of a Nano CaO/Al2O3 CO2 Sorbent

Modified Kinetics Model of Nano CaO Reactions with CO2 in a CaO-Based Adsorbent

Ca based high temperature CO2 absorbents for sorption enhanced reforming process

The Microstructure and Stability of a Ni-nano-CaO/Al2O3 Reforming Catalyst under Carbonation–calcination Cycling Conditions

Properties of a Nano CaO/Al<sub>2</sub>O<sub>3</sub>CO<sub>2</sub>Sorbent

Experiment and Modeling of Co2 Capture from Flue Gases at High Temperature in A Fluidized Bed Reactor with Ca-Based Sorbents

Modeling of Carbonation Reaction for CaO-based Limestone with CO2 in Multitudinous Calcination-Carbonation Cycles

Modeling of the Carbonation Kinetics of A Synthetic Cao-Based Sorbent

Studies on CO2 uptake by CaO/Ca3Al2O6 sorbent in calcium looping cycles

Effect of Preparation Temperature on Cyclic CO2 Capture and Multiple Carbonation−Calcination Cycles for a New Ca-Based CO2 Sorbent

Experiment of CO_2 Capture Based on Ca-based Sorbents Cyclic Calcination/carbonation Reaction

Experiment And Modeling Of Co(2) Capture From Flue Gases In A Fluidized Bed With Limestone And Dolomite Sorbents

Enhanced cyclic stability of CO 2 adsorption capacity of CaO-based sorbents using La 2 O 3 or Ca 12 Al 14 O 33 as additives

Carbonation Kinetics of CO2 with CaO-Ca9Al6O18 Sorbent

Development of CaO-based Sorbent Doped with Mineral Rejects–bauxite-Tailings in Cyclic CO2 Capture

Synthesis and Performance of a Nano Synthetic Ca-based Sorbent for High Temperature CO_2 Capture

Modeling of the Carbonation Behavior of a Calcium Based Sorbent for CO2 Capture

Developing a Novel CaO-Based Sorbent for Promoted CO2 Capture and Tar Reduction

Experimental Research on CaO Carbonation/Calcination Cycles in Fluidized Bed