Abstract:The cyclic CO2 capture, transient phases change, and microstructure appearance of a new kind of Ca-based regenerable CO2 sorbent, CaO/Ca12Al14O33, obtained by the integration of CaO as solid reactant with a composite metal oxide of Ca12Al14O33 as a binder, were investigated by thermogravimetric analysis, XRD, and SEM at different preparation calcination temperatures. When the calcination temperature in the preparation stage is higher than 1000 degrees C, the cyclic CO2 capture of this new sorbent declines. The lowered CO2 capture may mainly be attributed to the formation of Ca3Al2O6, which decreases the ratio of CaO to binder in sorbent, and the severe sintering of sorbent occurs when calcined at such high temperatures in the preparation processes. These results suggest that the calcination temperature for this new sorbent should not be higher than 1000 degrees C in order to obtain its high reactivity. The performance of the new sorbent over 50 cycles was evaluated under mild and severe regeneration conditions, respectively. CaO/Ca12Al14O33 attained 41 wt % CO2 capture after 50 carbonation-calcination cycles under mild calcination conditions (850 degrees C, 100% N-2), and the results obtained here indicate that the new sorbent, CaO/Ca12Al14O33, has significantly improved CO2 capture and cyclic reaction stability over multiple carbonation-calcination cycles compared with limestone and dolomite under mild calcination conditions. When more severe calcination conditions (980 degrees C, 100% CO2) were used, the capture of CaO/Ca12Al14O33 decreased from 52 wt % in the first cycle to about 22 wt % in the 56th cycle; however, the capture of CaO/Ca12Al14O33 sorbent over 56 cycles is still higher than that of dolomite and limestone under the same severe calcination conditions.

Cyclic Reaction Characters of Novel CaO/MgO High Temperature CO2 Sorbents

Properties of a Nano CaO/Al2O3 CO2 Sorbent

Synthesis of a Porous Nano‐CaO/MgO‐Based CO2 Adsorbent

Adsorption Properties of Coating Modified Nano CaO-Based CO2 Adsorbents

Properties of a Nano CaO/Al<sub>2</sub>O<sub>3</sub>CO<sub>2</sub>Sorbent

Modified Kinetics Model of Nano CaO Reactions with CO2 in a CaO-Based Adsorbent

CO2 Sorption Durability of Zr-Modified Nano-CaO Sorbents with Cage-like Hollow Sphere Structure

Characteristics of MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure

Ca based high temperature CO2 absorbents for sorption enhanced reforming process

Regenerable MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure: Experimental and DFT Study

Promotion of MgO Sorbents with Eutectic Carbonate Doping for High-Temperature and Pressure CO2 Capture

Wet Mixing Combustion Synthesis of CaO-based Sorbents for High Temperature Cyclic CO2 Capture

Synthesis and Performance of a Nano Synthetic Ca-based Sorbent for High Temperature CO_2 Capture

Enhanced cyclic stability of CO 2 adsorption capacity of CaO-based sorbents using La 2 O 3 or Ca 12 Al 14 O 33 as additives

Experimental Research and Modeling of Multiple Carbonation/Calcination Cycle of Ca-based CO2 Sorbents

Effect of Ph Value on Reaction Property of CaO/MgO Sorbent Prepared by Sol-Gel Combustion Method

Effect of Preparation Temperature on Cyclic CO2 Capture and Multiple Carbonation−Calcination Cycles for a New Ca-Based CO2 Sorbent

Reactivity and Microstructure of Synthetic CaO-based Sorbents for CO2 Capture

Investigation on a Novel CaO–Y2O3 Sorbent for Efficient CO2 Mitigation

Studies on CO2 uptake by CaO/Ca3Al2O6 sorbent in calcium looping cycles