Abstract:The calcium looping (CaL) process is a promising CO2 capture technology, which uses CaO-based sorbents by employing a reversible reaction between CaO and CO2 generally named carbonation and calcination for each direction of the reaction. Although CaO-based sorbents possess many advantages, including wide availability, relatively low cost, and high theoretical CO(2 )uptake (similar to 0.786 g of CO2/g of CaO), it mainly suffers from a rapid decline in CO(2 )capture performance during cyclic operation, which has remained an urgent issue required to be addressed for industrial applications of the CaL process. Extensive studies have been conducted thus far, attempting to prevent and/or alleviate the rapid performance decay of the sorbents. Thus, this paper reviews the recent development of the CaL process worldwide with an emphasis on its development in China, mainly focusing on the advancement in the design and reinforcement of CaO-based sorbents. These activation strategies mainly include doping, chemical pretreatment, incorporation of supports with high Tammann temperatures, and structural modification, which do enhance the cyclic performance of the sorbents. However, some challenges still exist in the development of the CaO-based sorbents, such as the cost of the synthesis route, the scale-up pathways of the sorbents, the assessment of cyclic performance under mild conditions, and the ignorance of mechanical strength and attrition resistance of the sorbents. Therefore, life cycle assessment together with techno-economic analysis is essential when synthesizing CaO-based sorbents. In addition, more work should be conducted under industrially relevant conditions in fluidized bed reactors and even pilot-scale reactors, which are much closer to industrial situations. In this case, mechanical strength and attrition resistance are also assessed during cyclic operation.

Research and Development on Cyclic Calcination/Carbonation Reaction With Ca-based Sorbents to CO2 Capture From Flue Gases

Study on the kinetics of Ca-based CO2 sorbent of carbonation and calcination for adsorption enhanced reforming process

Experiment research on CO2 capture from flue gases using interconnected fluidized bed reactors with Ca-based sorbent

Process Analysis of CO2 Capture from Flue Gas Using Carbonation/calcination Cycles

Design and development of 3D hierarchical ultra-microporous CO2-sieving carbon architectures for potential flow-through CO2 capture at typical practical flue gas temperatures

Experiment and Modeling of Co2 Capture from Flue Gases at High Temperature in A Fluidized Bed Reactor with Ca-Based Sorbents

Experiment And Modeling Of Co(2) Capture From Flue Gases In A Fluidized Bed With Limestone And Dolomite Sorbents

Experiment of CO_2 Capture Based on Ca-based Sorbents Cyclic Calcination/carbonation Reaction

Experimental research and modeling of multiple carbonation/calcination cycle of Ca-based CO2 sorbents

Steam Hydration Reactivation of Cao-Based Sorbent in Cyclic Carbonation/Calcination for Co2 Capture

Developing a Novel CaO-Based Sorbent for Promoted CO2 Capture and Tar Reduction

CO2 Capture from Flue Gases Using Three Ca-Based Sorbents in a Fluidized Bed Reactor

Synthesis and Performance of a Nano Synthetic Ca-based Sorbent for High Temperature CO_2 Capture

Green Synthesis of Nanosilica from Coal Fly Ash and Its Stabilizing Effect on CaO Sorbents for CO 2 Capture.

Research status of calcium oxide-based sorbents for CO2 absorption at high temperature

Hydration Reactivation of CaO-Based Sorbent for Cyclic Calcination-Carbonation Reactions

Development of Sintering-Resistant Cao-Based Sorbent Derived from Eggshells and Bauxite Tailings for Cyclic Co2 Capture

Recent Progress of Amine Modified Sorbents for Capturing CO2 from Flue Gas

Insight into the deactivation mechanism of CaO-based CO 2 sorbent under in-situ coal combustion

Review on the development of sorbents for calcium looping