Abstract:CO2 capture is essential for addressing dual-carbon strategies and achieving carbon neutrality. Membrane separation is favored for CO2 separation due to its high efficiency, low energy consumption, and operational convenience. Combining supported liquid membrane technology with ionic liquids (ILs) enables continuous CO2 separation from flue gas without requiring regeneration, simplifying processes, and reducing steps compared to pure IL absorption or adsorption methods. However, supported IL membranes suffer from liquid leakage. This study proposes a novel mechanism for CO2 capture using liquid-catched supported membranes (LCSMs). The LCSM was formed by adding a liquid-locking polymer layer to a porous support membrane. This study investigates the CO2 separation performance of LCSMs from the perspectives of material optimization and operational conditions. Sodium polyacrylate was selected as the liquid-locking polymer material based on molecular simulations. Experiments were conducted to investigate the effects of the support membrane type, liquid type, and liquid concentration on CO2 separation by LCSMs. Further experiments examined the influence of temperature, pressure, liquid concentration, and gas source composition on the separation performance of LCSMs. The optimal conditions for membrane fabrication and operation were determined. In addition, the transmembrane transport mechanism of CO2 separation using LCSMs was studied using molecular dynamics simulations, modeling analyses, and calculations. The simple solution-diffusion mechanism could not accurately describe the CO2 transmembrane transport behavior. A modified solution-ionization-diffusion mechanism was proposed to elucidate the CO2 transmembrane transport mechanism in LCSMs, showing good agreement with experimental results of CO2/N2 separation. Finally, a process for CO2 separation from the flue gas was developed. Preliminary calculations indicated that the capture energy consumption could be reduced to less than 2 GJ/tCO2, significantly lower than traditional absorption methods, with broader applicability and reduced footprint. This process is simpler, continuous, and less expensive. These results indicate that LCSMs are promising and novel methods for CO2 capture, offering an effective and economical solution for industrial applications.

Experiment research on CO2 continuous capture using dual fluidized bed reactors with supported amine

Continuous CO2 Capture in Dual Fluidized Beds Using Silica Supported Amine

Investigation of Thermal Stability and Continuous CO2 Capture from Flue Gases with Supported Amine Sorbent

Continuous CO 2 Capture in a Circulating Fluidized Bed Using Supported Amine Sorbents

Study on CO2 Absorption-Mineralization Characteristics of Mixed Amine Solution Coupled with CaO and Key Influencing Factors in Mineralization Process

Post-Combustion CO2 Capture Demonstration Using Supported Amine Sorbents: Design and Evaluation of 200 Kwth Pilot

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions.

Selective Separation of Low Concentration CO2 Using Hydrogel Immobilized CA Enzyme Based Hollow Fiber Membrane Reactors

Adsorption Separation of CO2 from Flue Gas by Hyperbranched Solid-Amine

Experiment research on CO2 capture from flue gases using interconnected fluidized bed reactors with Ca-based sorbent

Two-dimensional full-loop simulation of CO2 capture process in a novel dual fluidized bed system

Capture and Separation of CO2 from Flue Gas by Coupling Free and Immobilized Amines.

Experimental Study and Numerical Simulation on CO2 Capture from Flue Gas Using Amine-Based Absorbent in Coal-Fired Power Plant

Experiment And Modeling Of Co(2) Capture From Flue Gases In A Fluidized Bed With Limestone And Dolomite Sorbents

Research Progress on Amine Absorbent for CO2 Capture from Flue Gas

New CO2 Capture Process with Gas–Liquid–Solid Three-Phase Circulating Fluidized Bed

Development and testing of a new post-combustion CO2 capture solvent in pilot and demonstration plant

Experimental Study on the Separation of CO2 from Flue Gas Using Hollow Fiber Membrane Contactors Without Wetting

Experimental study on the influence of SO2 on the CO2 capture process

CFD SIMULATION AND EXPERIMENTAL STUDY ON CO2 CAPTURE IN FLUIDIZED BED REACTOR USING DRY POTASSIUM-BASED SORBENT

Preparation and Transmembrane Transport Mechanism of Liquid-Catched Supported Membranes with High CO2 Separation Performance