Abstract:In recent years, global warming and climate change caused by the greenhouse gas emissions has given rise to widespread concerns. CO2 has been considered as the principal greenhouse gas of interest, and fossil-fuel-fired power plants have been deemed as the largest stationary sources of CO2 emission. It is imperative to capture CO2 from these sources to reduce the global CO2 emissions. Lately, capturing CO2 from flue gas using solid absorbents shows promising for CO2 abatement. For the cost-effective CO2 capture process and the recycling of environmental pollutants, deprecated resources have been utilized for CO2 capture from flue gas. In this work, fly ashes derived from different raw materials were tried as solid CO2 sorbents for flue gas treatment. To improve their CO2 capture capacities, the ashes were modified by different polyamines. An experimental demonstration on CO2 capture behaviors of fresh ashes and modified sorbents in simulated flue gas atmosphere of 40°C, 15% CO2 + 15% H2O and balanced N2 was presented in detail with a fixed-bed reactor system. CO2 capture capacities of fresh ashes were calculated as 0.56 mmolCO2/g, 0.32 mmolCO2/g, 0.44 mmolCO2/g and 0.83 mmolCO2/g, respectively. By contrast, CO2 capture capacities of amine-modified samples had been enhanced as 0.38 mmolCO2/g, 0.65 mmolCO2/g, 1.07 mmolCO2/g, 0.85 mmolCO2/g and 1.17 mmolCO2/g. The optimal sample of TEPA-modified biomass ash (TEPA-BA) with CO2 capture capacity of 1.17mmolCO2/g was screened. The optimal candidate was then selected for further investigation of the effects of temperature, CO2 concentration and H2O concentration on its CO2 capture behaviors. The results indicated that CO2 capture capacity would increase with the increase of temperature in the range of 30 to 40 °C and decrease with the increase of temperature in the range of 40 to 60°C, increase with the increase of CO2 concentration in the range of 5% to 20%, increase with the increase of H2O concentration in the range of 0% to 15% and decrease with the increase of H2O concentration in the range of 15% to 20%. The results in this work could provide basic data as a guidance for further applying the sorbents in practical operations.

Fly Ash-CaO Sorbents Modified with Chlorides and Hydroxides for CO2 Capture in High-Temperature Flue Gas

Study on Cyclic Carbonation Property of CaO-based Sorbents Modified With Fly Ash

Fly-Ash-Modified Calcium-Based Sorbents Tailored to Co2 Capture

Performance of Coal Fly Ash Stabilized, CaO-based Sorbents under Different Carbonation–Calcination Conditions

Development of Stabilized Ca-based CO2 Sorbents Supported by Fly Ash

The Effect of Fly Ash on Reactivity of Calcium Based Sorbents for CO 2 Capture

Carbonation kinetics of fly-ash-modified calcium-based sorbents for CO2 capture

A Study on the Mechanisms of Coal Fly Ash to Improve the CO2 Capture Efficiency of Calcium-Based Adsorbents

High Performance of Fly Ash Derived Li 4Sio4-Based Sorbents for High Temperature CO2 Capture

Green Synthesis of Nanosilica from Coal Fly Ash and Its Stabilizing Effect on CaO Sorbents for CO 2 Capture.

Development of a Fly Ash Derived Li4SiO4-based Sorbent for CO2 Capture at High Temperatures

High-Entropy Fluorite Oxide-Modified CaO-Based Sorbent Pellets for Enhanced High-Temperature CO2 Capture

CO2 capture enhancement by metal oxides impregnated coal fly ash: a breakthrough adsorption study

Studies on Several Fly Ashes and Their Modified Materials for CO2 Capture

Enhancement of reactivity in surfactant-modified sorbent for CO2 capture in pressurized carbonation

K2co3-Modified Potassium Feldspar for Co2 Capture from Post-Combustion Flue Gas

A green and scalable synthesis of highly stable Ca-based sorbents for CO2 capture

All-solid-waste-derived CaO-based Sorbents for Simultaneously Enhanced Calcium Looping CO2 2 Capture and Thermochemical Energy Storage

Reactivity Enhancement of Calcium Based Sorbents by Doped with Metal Oxides Through the Sol–gel Process

High-Efficiency CaO-Based Sorbent Modified by Aluminate Cement and Organic Fiber Through Wet Mixing Method

The Effects of Water Vapor and Coal Ash on the Carbonation Behavior of CaO-sorbent Supported by Γ-Al2o3 for CO2 Capture