Abstract:The prediction of noise radiated by underwater structures is one of the most important research topics in the field of acoustics. This paper aims to set up an integrated approach for acoustic radiation analysis that could be used to assess and optimize the vibro-acoustic performance of pre-determined design targets, while identifying and quantifying the sound sources responsible for the behaviour. Such an approach, based on numerical procedures or experimental data, enables the fast prediction of sound radiation from a typical submarine cabin (a double cylindrical shell with superstructure). Vibro-acoustic prediction in the low- to mid-frequency range is generally performed through the boundary element method (BEM) or finite element method (FEM). In this paper, a combined usage of the two methodologies is adopted: FEM is used for the structural dynamics and BEM for the acoustic problem resolution. The acoustic field obtained by the FEM/BEM approach is adopted as the reference result. Meanwhile, acoustic transfer vector (ATV) technology is performed with the use of velocity distribution of the cabin. It is verified that the calculation results between the two methods are in substantial agreement, while the ATV method shows greater efficiency. Experimental research on the vibration of a scaled model is also performed. Comparing the experimental and numerical radiation results based on measured vibration data enables the accuracy level of the ATV forecast method to be assessed. From this, it is probable that the fast prediction of sound radiation by use of ATV is an effective approach for rapid evaluation of the vibro-acoustic response in the engine development process.

Research on Simulation and Prediction of Internal Combustion Engine Structural Acoustic Radiation

Finite Element Method Simulation Analysis for Sound Field of Exhaust Muffler

Numerical Analysis of Acoustic Characteristic of Muffler with Complicated Structure and Structural Optimization

The Holistic Finite Element Model Analysis of Diesel Engine

Numerical Simulation and Structure Optimization of Compressor Muffler

Application of Acoustic Transfer Vector Algorithm on Acoustic Radiation for Drive Axle of Automobile

Preliminary Study on Circuit Simulation of Thermoacoustic Engines

Integrated Virtual-Design Methods for Forecasting Radiated Noise of Single Cylinder Diesel Block

Noise Sources Identification of Internal Combustion Engine Using Inverse Boundary Element Method

Prediction method of radiated noise by engine block

The Fast Prediction of Sound Radiation from Typical Submarine Cabin Based on Acoustic Transfer Vector

Study on Noise Emission of Engine Block Based on Numerical Simulation

Application of Virtual Prediction Method to Low-Noise Diesel Engine Design

A Research on Prediction and Reduction of Radiated Noise from Oil Pan of Diesel Engine

Acoustic Prediction Method of Engine Thin-Walled Parts Considering Transmission Noise

Prediction of Engine Block's Radiation Noise and Low-Noise Design

Coupled optimization of internal combustion engine radiated noise and interior noise

A Research on the Design of Low-noise Oil-pan Based on FEM and BEM

Experimental Validation of Sound Quality Simulation and Optimization of a Four-Cylinder Diesel Engine

Research on Prediction Method of Radiated Noise of Engine Oil Pan

Extraction of Intake Acoustic Source and Prediction of Intake Noise of a Turbocharged Engine