Abstract:Vibration shaker testing is a great tool of validating the vibration fatigue performance of automotive components & systems. However, the representative vibration schedule requires a pre-knowledge of the acceleration history for the test object, which usually is not available until the later development phase of a vehicle program when physical properties are available. Sometimes, a generic vibration schedule developed from the worst-case loading profiles are used with risk of lacking correlation with later full vehicle durability test such as Road Test Simulator (RTS) or Proving Ground (PG) road test due to the higher loading amplitude. This paper proposes a virtual accelerometer approach to collect acceleration responses of a component from a virtual vehicle model. First, a multiple body dynamic model will be produced for virtual load calculation over a series of digitalized virtual proving ground road profiles. These loads will be then applied on the virtual vehicle CAE model with all representative components & subsystems. Acceleration response for the system of interest is then extracted from modal transient dynamic analysis. Later, the acceleration history is converted to frequency domain, and the associated spectral damage calculation is conducted. The final vibration profile is developed based on the equivalent damage concept. The virtual acceleration acquisition and physical acceleration acquisition show good agreement in both time domain and frequency domain. The profile generated from virtual acceleration acquisition covers very well for the physical acceleration acquisition. Overall, virtual acceleration-based profile ensures the conservative shake test results for the example studied. Compared to the physical accelerometer, the virtual accelerometer can provide acceleration data economically and quickly in the early phase of the product development. The proposed approach will ensure the component shaker test is conducted using the meaningful and representative vibration load.

Application of Acoustic Transfer Vector Algorithm on Acoustic Radiation for Drive Axle of Automobile

A Study on the Noise and Vibration Testing System for Automotive Final Drive

Numerical Analysis on Acoustic Characteristics of Automotive Exhaust Muffler by Transfer Matrix Method

Investigation of Multi-Degree of Freedom Damped Dynamic Absorber Applied to Wheel Noise Control

The Fast Prediction of Sound Radiation from Typical Submarine Cabin Based on Acoustic Transfer Vector

Application of Acoustic-solid Coupling Theory in New Energy Vehicle Noise Control

A Process to Characterize the Sound Directivity Pattern of AVAS Speaker

Virtual Accelerometer Approach to Create Vibration Profile for Automotive Component Shake Test

Study On Adaptive Active Control Of Unstable Noise In Vehicle

Quantitative Measurement of Pass-by Noise Radiated by Vehicles Running at High Speeds

Prediction and Optimization of Full-Vehicle Road Noise Based on Random Response Analysis

An equivalent modelling approach for vibroacoustic characteristics analysis of railway aluminium extrusion

Acoustic-vibration analysis of the gear-bearing-housing coupled system

Acoustic optimisation design for suspension characteristics based on the method of dynamic subsystem modification

Numerical Analysis of Aeroacoustic Phenomena Generated by Heterogeneous Column of Vehicle

THE STRUCTURAL VIBRATION ANALYSIS METHOD FOR VEHICLE'S NOISE FACTOR

Acoustic Modelling and Analysis of Vehicle Interior Noise Based on Numerical Calculation

Vibration control of commercial vehicle drive axles based on modification of helical gears

Vibro-acoustic propagation of gear dynamics in a gear-bearing-housing system

STUDY ON A NEW VEHICLE ROAD SIMULATION ALGORITHM

Aerodynamic noise prediction of passenger vehicle with hybrid detached eddy simulation/acoustic perturbation equation method