Abstract:A self-powered electromagnetic vibration suppression and absorption system integrated with a magnetorheological damper and a linear motor is designed to attenuate the negative effect of vertical vibration caused by the increased unsprung mass for in-wheel motor electric vehicles in this article. The magnetorheological damper is used as a suspension damper to suppress body vibration, and linear motor is used as a dynamic vibration absorber, namely, linear electromagnetic dynamic vibration absorber, to absorb tire vibration, and regenerates the vibration power to drive the magnetorheological damper, realizing self-power. Based on power flow theory, the power transfer mechanism of the vertical vibration for in-wheel motor electric vehicles and the regeneration potential are analyzed. The negative effect on the dynamic performance of in-wheel motor electric vehicles is analyzed through the root mean square of dynamic responses. Moreover, the specific structure scheme of the self-powered electromagnetic vibration suppression and absorption system is provided. The influence of system mass, stiffness, and damping of the linear electromagnetic dynamic vibration absorber on the dynamic performance is analyzed, and these parameters are optimized by particle swarm optimization. Simulation results show that in comparison with a passive damper, the self-powered electromagnetic vibration suppression and absorption system can reduce the body acceleration by 17.05%, which is better than the magnetorheological damper (10.08%). The self-powered electromagnetic vibration suppression and absorption system increases the tire dynamic load by 5.62%, but it is 8.68% less than the magnetorheological damper. Additionally, the regenerated power can offset the consumed power adequately to realize self-power. Finally, a bench test is conducted to verify the effectiveness and feasibility of the self-powered electromagnetic vibration suppression and absorption system.

Investigation of Multi-Degree of Freedom Damped Dynamic Absorber Applied to Wheel Noise Control

Dynamic Characteristics and Modeling of A New Magnetorheological Damper for Broadband Vibration Control

An Acoustic Black Hole Absorber for Rail Vibration Suppression: Simulation and Full-Scale Experiment

Application of Dynamic Vibration Absorber to Optimization of NVH Property of Steering Wheels

Experimental study on controlling actively wheel unbalance vibration

Design of Helmholtz resonator group in a lightweight aluminum alloy wheel for reducing tire acoustic cavity resonance noise

Optimal design of dynamic vibration absorber for elastic vibration control of vehicle carbody in time-varying service environment

Vibration Control Effect Analysis on Tuned Mass Damper System Used in Urban Transportation

Wheel loader seat damping control research based on ADRC

In-wheel drive system design with dynamic vibration absorption based on the adaptive transmission mechanism

Research on Simulation Platform Architecture for Noise Reduction of Electric Locomotive Wheel

Tuned mass damper on spacecraft reaction wheel assembly

Research on optimization control of vehicle road noise performance

Research on Noise Reduction Performance of Wheel–Rail with Amplitude Amplifying Vibration Absorber

Multi-Source Coupling Based Analysis of the Acoustic Radiation Characteristics of the Wheel-Rail Region of High-Speed Railways

Topology Analysis and Structural Optimization of Air Suspension Mechanical-Vibration-Reduction Wheels

Explicit solution to the nonlinear geometry of double wishbone suspension by decoupling steering and wheel jumping DOF

Influence of structure and material on the vibration modal characteristics of novel combined flexible road wheel

Time-Delay Vibration Reduction Control of 3-DOF Vehicle Model with Vehicle Seat

Design and experimental verification of self-powered electromagnetic vibration suppression and absorption system for in-wheel motor electric vehicles

Integrated design of passive control methods for mitigating vibration and noise of rails in high-speed railway