Abstract:Structural vibration has always been a major concern in the engineering field. A dynamic vibration absorber in the form of contacts with adjustable stiffness (CDVA) offers effective vibration suppression and can improve conventional dynamic vibration absorbers with high sensitivity to frequency deviation and difficulty in adjusting the frequency. In this research, first, based on the theoretical model of the contact between a rubber ball and an inner cone, the feasibility of changing the axial contact state to change the structure's natural frequency was verified using an ANSYS simulation. A theoretical model of the static contact stiffness between the ball and the inner cone was constructed using Hertzian contact theory and Hooke's law, and a theoretical model of the cubic nonlinear elastic restoring force was used to characterize the stiffness properties of the rubber ball during compressive rebound. The steady-state frequency response equations of the main vibration structure were derived using the averaging method in conjunction with the two-degree-of-freedom dynamics model, and the stability of the solutions to the frequency response equations was obtained in conjunction with the stability determination criterion. Then, the impact of the CDVA's design parameters on the nonlinear dynamic response of the primary vibration structure was simulated and analyzed. The resulting findings can serve as guidance for designing dynamic vibration absorber parameters. Based on the principles of ball-inner cone contact, a dynamic vibration absorber structure was proposed. A design test was conducted to verify the correctness of the contact stiffness model, and an experimental study was carried out to investigate the law of change in the dynamic stiffness and damping of the principle structure of CDVA under dynamic excitation conditions. Finally, the vibration test platform of the solidly supported beam structure was constructed, and vibration suppression tests of the CDVA in different compression states were conducted to investigate the tunability and feasibility of CDVA vibration suppression. The results showed that the dynamic vibration absorber had good vibration absorption characteristics and could be used for single-mode vibration suppression of multimodal main structures.

Optimal design of dynamic vibration absorber for elastic vibration control of vehicle carbody in time-varying service environment

Investigation of Multi-Degree of Freedom Damped Dynamic Absorber Applied to Wheel Noise Control

Suppressing Random Response of a Regular Structure by an Inerter-Based Dynamic Vibration Absorber

Semi-active Bounded Optimal Control of Uncertain Nonlinear Coupling Vehicle System with Rotatable Inclined Supports and MR Damper under Random Road Excitation

Parameters optimum of multiple underframe suspended equipment on high-speed railway vehicle carbody vibration control by using an improved genetic algorithm

Bounded Time-Delay Control Performance of Two-Degree-of-freedom Nonlinear Vehicle System under Random Road Excitation Using MR Damper

Time-Delay Vibration Reduction Control of 3-DOF Vehicle Model with Vehicle Seat

Numerical and experimental study on adaptive stiffness yaw damper for suppressing abnormal vibration of high-speed trains

Vibration reduction performance of an innovative vehicle seat with a vibration absorber and variable damping cushion

Effect of delayed resonator on the vibration reduction performance of vehicle active seat suspension

In-wheel drive system design with dynamic vibration absorption based on the adaptive transmission mechanism

Coupling effect of track irregularity and wheel–rail contact conicity on carbody swaying of a metro vehicle: an experimental investigation

A Ball-Contacting Dynamic Vibration Absorber with Adjustable Stiffness and Nonlinear Characteristics

An optimal control method for time-delay feedback control of 1/4 vehicle active suspension under random excitation

Analysis and control of high-speed train lateral vibration on the basis of a conditionally triggered model predictive control strategy

A Vertical Coupling Dynamic Analysis Method and Engineering Application of Vehicle–track–substructure Based on Forced Vibration

Effect of time-delay feedback control on vehicle seat vibration reduction and suspension performance

Experimental and Numerical Investigation on Multi-module Coupling Vibration Performance of Light Rail Vehicle

Dynamic Analysis and Optimization of Vehicle-Bridge Interaction System under Road Roughness and Time Variability of Element Interpolation Function

Design and experimental verification of self-powered electromagnetic vibration suppression and absorption system for in-wheel motor electric vehicles