Abstract:Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, Ahead of Print. In the past, bogie hunting instability garnered more attention due to its potential for causing serious safety issues. However, with the rise in high-speed vehicle speeds and operational mileage, the concerns arising from carbody hunting can no longer be overlooked. This article investigates the causes and solutions for low-frequency carbody swaying under low effective conicity in wheel-rail contact, employing a combination of experimental and numerical techniques. Initially, the study involves an in-depth analysis of time-domain signals from lateral and vertical accelerations of the carbody and bogie frame during a high-speed train field-test. The carbody vibration mode resulting from carbody hunting displays a swaying motion at a frequency of 1.5 Hz. Subsequently, a dynamic system model of the high-speed vehicle was established and the suspension mode of the model were verified. The frequency of the carbody upper sway motion is determined to be 1.39 Hz. Low effective conicity is induced when grinding wheel match with new rail or new wheel match with grinding rail. Under this low effective conicity, the hunting frequency of the vehicle is around 1.5 Hz, close to the frequency of the carbody upper sway motion. The coincidence of the hunting frequency and the upper sway motion frequency leads to the low-frequency swaying of the carbody. At last, the effects of wheel profiles, rail profiles and suspension parameters on the carbody hunting have been studied. The study demonstrates that addressing low-frequency carbody swaying can be achieved through targeted rail grinding. This process involves modifying the rail profile while ensuring careful grinding of the rail inner corner. Furthermore, it has been confirmed in the article that replacing suitable yaw dampers is also effective.

Coupling effect of track irregularity and wheel–rail contact conicity on carbody swaying of a metro vehicle: an experimental investigation

Carbody abnormal lateral vibration failure of high–speed train induced by the coupling factor of the wheel re–profiling method and excessive rail wear

Experimental and numerical study on bogie hunting motion of metro vehicles induced by wheel concave wear

Experimental and Numerical Investigation on Multi-module Coupling Vibration Performance of Light Rail Vehicle

Carbody hunting behaviour of high speed vehicles in low effective conicity of wheel-rail contact

Study of Ground Vibration from Trains Caused by Track Irregularities

Dynamic Analysis of Metro Train-Monolithic Bed Track System under Tunnel Differential Settlement

Investigating the effect of rail profile deviation on hunting instability of high-speed railway vehicle under multi-parameter coupling

An investigation of high-frequency vibration of bogie frame due to wheel/rail short-pitch irregularities and its control methodologies

Mechanism analysis of low-frequency swaying motion of high-speed trains induced by aerodynamic loads

An investigation into the mechanism of metro rail corrugation using experimental and theoretical methods

Experimental and numerical investigation of the track structure elasticity induced by resilient fastener on vehicle-track interaction and train running stability

Carbody swaying suppression for a high-speed rail vehicle by utilising active lateral suspension control

Field measurement of track vibration induced by full-load and empty-load condition in curve section of underground metro line

Mechanism of high-speed train carbody shaking due to degradation of wheel-rail contact geometry

Numerical analysis of influence of different track structures on vibration response of subway

Track Irregularities Estimation Based on the Vibration of Car-Body

In-situ assessment of the sound and vibration reduction performance of a new type of resilient wheel installed on a metro train

Experimental and Numerical Investigation of Bogie Hunting Instability for Railway Vehicles Based on Multiple Sensors

Effect of car-body lower-center rolling on aerodynamic performance of a high-speed train