Abstract:Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, Ahead of Print. In the past, bogie hunting instability garnered more attention due to its potential for causing serious safety issues. However, with the rise in high-speed vehicle speeds and operational mileage, the concerns arising from carbody hunting can no longer be overlooked. This article investigates the causes and solutions for low-frequency carbody swaying under low effective conicity in wheel-rail contact, employing a combination of experimental and numerical techniques. Initially, the study involves an in-depth analysis of time-domain signals from lateral and vertical accelerations of the carbody and bogie frame during a high-speed train field-test. The carbody vibration mode resulting from carbody hunting displays a swaying motion at a frequency of 1.5 Hz. Subsequently, a dynamic system model of the high-speed vehicle was established and the suspension mode of the model were verified. The frequency of the carbody upper sway motion is determined to be 1.39 Hz. Low effective conicity is induced when grinding wheel match with new rail or new wheel match with grinding rail. Under this low effective conicity, the hunting frequency of the vehicle is around 1.5 Hz, close to the frequency of the carbody upper sway motion. The coincidence of the hunting frequency and the upper sway motion frequency leads to the low-frequency swaying of the carbody. At last, the effects of wheel profiles, rail profiles and suspension parameters on the carbody hunting have been studied. The study demonstrates that addressing low-frequency carbody swaying can be achieved through targeted rail grinding. This process involves modifying the rail profile while ensuring careful grinding of the rail inner corner. Furthermore, it has been confirmed in the article that replacing suitable yaw dampers is also effective.

Carbody swaying suppression for a high-speed rail vehicle by utilising active lateral suspension control

Linear stability analysis of a high-speed rail vehicle concerning suspension parameters variation and active control

Bifurcation and stability analysis of a high-speed rail vehicle with active yaw dampers

Semi-active control of primary suspensions to improve ride quality in a high-speed railway vehicle

A new semi-active control strategy on lateral suspension systems of high-speed trains and its application in HIL test rig

Disturbance observer-based sliding mode control of active vertical suspension for high-speed rail vehicles

A Semi-Active Control Suspension System for Railway Vehicles with Magnetorheological Fluid Dampers

Analysis on new semi-active control strategies to reduce lateral vibrations of high-speed trains by simulation and hardware-in-the-loop testing

Experimental investigations on the semi-active control of a valve-driven secondary lateral damper for a high-speed rail vehicle

A new hybrid control strategy for improving ride comfort on lateral suspension system of railway vehicle

Carbody hunting behaviour of high speed vehicles in low effective conicity of wheel-rail contact

A Low-Cost Lateral Active Suspension System of the High-Speed Train for Ride Quality Based on the Resonant Control Method.

A New Semi-Active Safety Control Strategy for High-Speed Railway Vehicles

Adaptive robust constraint-following control method for improving carbody hunting stability of high-speed trains

Semi-Active Suspension Control Strategy Based on Negative Stiffness Characteristics

Hybrid model predictive control on lifting and dropping vehicle body via asymmetric damping adjustment

Semi-active H∞ control of high-speed railway vehicle suspension with magnetorheological dampers

High-performance semiactive secondary suspension of high-speed trains using negative stiffness and magnetorheological dampers

Study on the coordination control of active suspension employing linear motor based on co-simulation

Improving ride comfort of straddle-type monorail vehicle with single-axle bogie by active suspension

Coupling effect of track irregularity and wheel–rail contact conicity on carbody swaying of a metro vehicle: an experimental investigation