Abstract:Journal of Low Frequency Noise, Vibration and Active Control, Ahead of Print. The ride comfort is a key research area for the quality improvement of railway vehicles. Several control methods have been developed to improve the ride comfort, in which the semi-active control approach inherits the advantages of passive and active control approaches. However, the semi-active control may perform ineffectively in vibration attenuation when the carbody load changes. To address this issue, we proposed a novel hybrid control method that combines the skyhook (SH) and displacement velocity (DV) control methods to reduce vibrations of the carbody in the lateral direction under carbody load changes. First, a hybrid control model built in Matlab software was applied to a quarter railway vehicle model for a preliminary assessment of the ride comfort. Second, to provide a more comprehensive evaluation, the proposed model was applied to a whole railway vehicle model using co-simulation (Matlab-Simpack). In the quarter model, under the sinusoidal excitation, the hybrid control showed a lower acceleration by 48.5% and 42.8% when the carbody load reduced to a half and a quarter, respectively, compared to the passive control. This finding was confirmed with the whole model. Moreover, in the whole model, under the track irregular excitation, the hybrid control showed a lower acceleration by 26.6% and 17.4% when the carbody load reduced to a half and a quarter, respectively. Further, the proposed method showed an acceptable safety level, measured by the derailment coefficient (0.0743 at a half load and 0.089 at a quarter load). In conclusions, the proposed hybrid SH-DV control exhibits high robustness, adaptability, effectiveness, and acceptable safety level in response to variations in body load.

Semi-active control of primary suspensions to improve ride quality in a high-speed railway vehicle

Analysis on new semi-active control strategies to reduce lateral vibrations of high-speed trains by simulation and hardware-in-the-loop testing

A new semi-active control strategy on lateral suspension systems of high-speed trains and its application in HIL test rig

A new hybrid control strategy for improving ride comfort on lateral suspension system of railway vehicle

A Semi-Active Control Suspension System for Railway Vehicles with Magnetorheological Fluid Dampers

A New Semi-Active Safety Control Strategy for High-Speed Railway Vehicles

Carbody swaying suppression for a high-speed rail vehicle by utilising active lateral suspension control

Experimental investigations on the semi-active control of a valve-driven secondary lateral damper for a high-speed rail vehicle

Semi-active H∞ control of high-speed railway vehicle suspension with magnetorheological dampers

Vehicle Safety and Comfort Control Base on Semi-Active Suspension

Semi-Active Suspension Control Strategy Based on Negative Stiffness Characteristics

Switching Control of Semi-Active Suspension Based on Road Profile Estimation

Vehicle Suspension Design with Semi-Active Inerter and Semi-Active Damper Configuration

A robust and fail-safe semi-active vertical damper to improve ride comfort

Disturbance observer-based sliding mode control of active vertical suspension for high-speed rail vehicles

Coordinate Control of Vehicle Semi-Active Suspension Based on Adams/Car and Matlab/Simulink

High-performance semiactive secondary suspension of high-speed trains using negative stiffness and magnetorheological dampers

A smart solution for improving ride comfort in high-speed railway vehicles

Ride comfort assessment and improvement in high-speed railway vehicle

Modelling and Dynamic Analysis of Adaptive Neuro-Fuzzy Inference System-Based Intelligent Control Suspension System for Passenger Rail Vehicles Using Magnetorheological Damper for Improving Ride Index

Study on Self-tuning Control Strategy of Suspension Systems for Improving Vehicle Ride Performance