A robust and fail-safe semi-active vertical damper to improve ride comfort

Gioele Isacchi,Francesco Ripamonti

DOI: https://doi.org/10.1080/00423114.2024.2398033

IF: 3.749

2024-09-03

Vehicle System Dynamics

Abstract:In recent years, the technical progress in railway engineering has led to the integration of electronic elements in suspension components that once were purely mechanical. Many studies have been carried out, developing active and semi-active suspensions. Among these, semi-active suspensions are particularly attractive due to their simpler design compared to fully active ones. In this context, this paper proposes a semi-active vertical damper to be implemented on the secondary suspension stage of rail vehicles. A prototype is developed by modifying a pre-existing passive damper through the addition of an external servo-valve which manages an additional by-pass channel between the compression and rebound chambers. The prototype is characterised on a dedicated test rig. A reduced vehicle model is then developed as the starting point in developing a sliding mode controller to manage the semi-active feature of the damper. A time-varying sliding surface containing the state of the system and car body accelerations is proposed. Finally, the damper prototype is tested on a hardware-in-the-loop test rig, focusing the experimental campaign on quantifying the damper performance, the evaluation of the controller robustness and a failure analysis to study the behaviour of the proposed solution even in the case of unexpected failures.

engineering, mechanical