Abstract:Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, Ahead of Print. In the past, bogie hunting instability garnered more attention due to its potential for causing serious safety issues. However, with the rise in high-speed vehicle speeds and operational mileage, the concerns arising from carbody hunting can no longer be overlooked. This article investigates the causes and solutions for low-frequency carbody swaying under low effective conicity in wheel-rail contact, employing a combination of experimental and numerical techniques. Initially, the study involves an in-depth analysis of time-domain signals from lateral and vertical accelerations of the carbody and bogie frame during a high-speed train field-test. The carbody vibration mode resulting from carbody hunting displays a swaying motion at a frequency of 1.5 Hz. Subsequently, a dynamic system model of the high-speed vehicle was established and the suspension mode of the model were verified. The frequency of the carbody upper sway motion is determined to be 1.39 Hz. Low effective conicity is induced when grinding wheel match with new rail or new wheel match with grinding rail. Under this low effective conicity, the hunting frequency of the vehicle is around 1.5 Hz, close to the frequency of the carbody upper sway motion. The coincidence of the hunting frequency and the upper sway motion frequency leads to the low-frequency swaying of the carbody. At last, the effects of wheel profiles, rail profiles and suspension parameters on the carbody hunting have been studied. The study demonstrates that addressing low-frequency carbody swaying can be achieved through targeted rail grinding. This process involves modifying the rail profile while ensuring careful grinding of the rail inner corner. Furthermore, it has been confirmed in the article that replacing suitable yaw dampers is also effective.

Linear stability analysis of a high-speed rail vehicle concerning suspension parameters variation and active control

Bifurcation and stability analysis of a high-speed rail vehicle with active yaw dampers

Carbody swaying suppression for a high-speed rail vehicle by utilising active lateral suspension control

Disturbance observer-based sliding mode control of active vertical suspension for high-speed rail vehicles

Analysis on new semi-active control strategies to reduce lateral vibrations of high-speed trains by simulation and hardware-in-the-loop testing

Suspension parameter optimization for high-speed train with severe tread wear

A Low-Cost Lateral Active Suspension System of the High-Speed Train for Ride Quality Based on the Resonant Control Method.

Improving the stability of high-speed trains using an innovative passive yaw damper

Double-parameter Hopf bifurcation analysis of a high-speed rail vehicle with an alternative wheel/rail contact approximation

Hunting stability analysis of high-speed train bogie under the frame lateral vibration active control

Study on dynamic performance of high-speed railway vehicle using roller rig and numerical simulation

A new semi-active control strategy on lateral suspension systems of high-speed trains and its application in HIL test rig

An Active Repetitive Learning Control Method for Lateral Suspension Systems of High-Speed Trains

Experimental investigations on the semi-active control of a valve-driven secondary lateral damper for a high-speed rail vehicle

Multibody system dynamics modelling and simulation of a high-speed train for its suspension optimization

A New Semi-Active Safety Control Strategy for High-Speed Railway Vehicles

Sliding Mode Control of Lateral Semi-Active Suspension of High-Speed Train

Dynamics of a High-Speed Railway Wheelset with Two Time Delays in Primary Suspension Dampers

Investigating the effect of rail profile deviation on hunting instability of high-speed railway vehicle under multi-parameter coupling

Semi-active control of primary suspensions to improve ride quality in a high-speed railway vehicle

Carbody hunting behaviour of high speed vehicles in low effective conicity of wheel-rail contact