Abstract:Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, Ahead of Print. In the past, bogie hunting instability garnered more attention due to its potential for causing serious safety issues. However, with the rise in high-speed vehicle speeds and operational mileage, the concerns arising from carbody hunting can no longer be overlooked. This article investigates the causes and solutions for low-frequency carbody swaying under low effective conicity in wheel-rail contact, employing a combination of experimental and numerical techniques. Initially, the study involves an in-depth analysis of time-domain signals from lateral and vertical accelerations of the carbody and bogie frame during a high-speed train field-test. The carbody vibration mode resulting from carbody hunting displays a swaying motion at a frequency of 1.5 Hz. Subsequently, a dynamic system model of the high-speed vehicle was established and the suspension mode of the model were verified. The frequency of the carbody upper sway motion is determined to be 1.39 Hz. Low effective conicity is induced when grinding wheel match with new rail or new wheel match with grinding rail. Under this low effective conicity, the hunting frequency of the vehicle is around 1.5 Hz, close to the frequency of the carbody upper sway motion. The coincidence of the hunting frequency and the upper sway motion frequency leads to the low-frequency swaying of the carbody. At last, the effects of wheel profiles, rail profiles and suspension parameters on the carbody hunting have been studied. The study demonstrates that addressing low-frequency carbody swaying can be achieved through targeted rail grinding. This process involves modifying the rail profile while ensuring careful grinding of the rail inner corner. Furthermore, it has been confirmed in the article that replacing suitable yaw dampers is also effective.

Study on dynamic performance of high-speed railway vehicle using roller rig and numerical simulation

Numerical Investigation into the Critical Speed and Frequency of the Hunting Motion in Railway Vehicle System

Dynamics analysis of higher speed bogie with inner axle box bogie

Investigating the effect of rail profile deviation on hunting instability of high-speed railway vehicle under multi-parameter coupling

Hunting stability and dynamic stress analysis of a high-speed bogie using elastic-suspended motors as dynamic vibration absorber

Linear stability analysis of a high-speed rail vehicle concerning suspension parameters variation and active control

Numerical and experimental investigation of the wheel/rail interaction and dynamics for a high-speed gauge-changeable railway vehicle

Experimental and numerical research on the bogie hunting of a high-speed train caused by the empty stroke of yaw damper

Dynamic Modeling, Dynamic Characteristics, and Slight Self-Guidance Ability at High Speeds of Independently Rotating Wheelset for Railway Vehicles

Explicit Dynamics Simulation of High-Speed Railway Bearing Based On ANSYS/LS-DYNA

Study on the gear-rack meshing dynamic performance based on a multi-body dynamic model of rack rail vehicle

A New Semi-Active Safety Control Strategy for High-Speed Railway Vehicles

Dynamics simulation of a high-speed railway car operating in low-temperature environments with stochastic parameters

Simulating Train Moving Loads in Physical Model Testing of Railway Infrastructure and Its Numerical Calibration

Experimental study of bogie instability monitoring and suppression measures for high-speed EMUs

Carbody hunting behaviour of high speed vehicles in low effective conicity of wheel-rail contact

Development of Test Rig for High-Speed Railway Rolling Bearings

Dynamic implementation and verification of the gauge changing function of high-speed variable gauge bogies

Development of Load System for High-Speed Railway Rolling

Research on Load Characteristics of Axle-Box Bearing Raceway under Wheel-Rail Excitation

Influence of individual wheel profiles on the assessment of running dynamics of a rail vehicle by numerical simulation: a case study