Abstract:Vibration behaviors of bogie hunting motion contain key information that dominates the dynamic performance of rail vehicles, in which the eigenvalue of each mode reflects the damping ratio and the natural frequency. This paper focuses on the root loci curves of bogie hunting motion, starting from a rigid bogie, then to a bogie with flexible primary suspension. With regard to the rigid bogie, analytical formulas for the eigenvalues, the critical speed as well as the corresponding hunting frequency are derived and verified. While for the flexible bogie, the root loci curves are calculated numerically. The study shows that both free rigid bogie and free wheelset are dynamically unstable at any speed. The critical speed increases with diminished wheel-rail conicity, track gauge, and wheelset and bogie inertia, and with increased wheelbase and wheel radius. The dominating factors such as the stiffness of the primary suspension and the wheel-rail conicity should be optimized for a practical design. The influences of the damping coefficients and the variations of creep coefficients are negligible. The motor suspension affects the root loci curves and the critical speed significantly. Both inappropriate motor suspension design and rigidly suspended motor reduce the critical speed. The increase of critical speed by a motor suspension can only be achieved when the lower natural frequency of the motorbogie frame-wheelsets system coincides with or is close to the hunting frequency. Special care should be taken for the design of motor suspension, the first is to avoid the decreased damping ratio in a certain speed range below the critical speed and the second is that the variations of parameters should not induce the rapid reduction of the critical speed. The main feature of the present study is that the root loci curves, which are derived as analytical formulas or calculated numerically, are used to study the vibrational behaviors of bogie hunting motion. Both the influencing laws of the dominating parameters and the principles regarding the motor suspension are significant for the stability design of modern railway vehicles which may use innovative structures/materials as well as modern control and monitoring technologies.

Dynamics analysis of higher speed bogie with inner axle box bogie

Study on dynamic performance of high-speed railway vehicle using roller rig and numerical simulation

Vibration analysis of bogie components based on electromechanical coupling model and test for high speed train

Research on the Vibration Insulation of High-Speed Train Bogies in Mid and High Frequency

Experimental and numerical research on the bogie hunting of a high-speed train caused by the empty stroke of yaw damper

Explicit Dynamics Simulation of High-Speed Railway Bearing Based On ANSYS/LS-DYNA

Analysis of vibration and temperature on the axle box bearing of a high-speed train

Hunting stability and dynamic stress analysis of a high-speed bogie using elastic-suspended motors as dynamic vibration absorber

Research on the Dynamic Characteristic of the Bogie in Dynamic Track Stabilizer under the Excitation of the Track Irregularities

Dynamic implementation and verification of the gauge changing function of high-speed variable gauge bogies

Experimental study of bogie instability monitoring and suppression measures for high-speed EMUs

Study on the vibration characteristics of double-row tapered roller bearings for high-speed rail axle box

Research on Load Characteristics of Axle-Box Bearing Raceway under Wheel-Rail Excitation

Study on dynamic characteristics of urban rail transit vehicle considering faulty axle-box bearings under variable speeds

Analysis of primary suspension equivalent positioning stiffness of rotary arm type axle box bogie

A novel dynamics model of a trailer bogie brake system and its application in stability analysis

Research on the Lateral Vibration Characteristic of the Bogie in Dynamic Track Stabilizer with Track Irregularity Excitation

Measured dynamic load distribution within the in situ axlebox bearing of high-speed trains under polygonal wheel–rail excitation

Vibration characteristics of bogie hunting motion based on root loci curves

Influence of wheel-polygonal wear on the dynamic forces within the axle-box bearing of a high-speed train

Study of Resonance between Bogie Hunting and Carbody Mode via Field Measurements and Dynamic Simulation