Abstract:This study involves the development of a full-scale physical model test apparatus to investigate the dynamic performance of the slab track system of a high-speed railway. A portion of a railway ballastless track with embankment and underlying soil strata was built inside a steel box (15 m long, 5 m wide and 6 m high). A sequential-load-generating system consisting of eight high-performance actuators was developed to apply a load that was equivalent to that generated by a train moving at speeds up to 360 km/h. Two loading conditions can be implemented in the tests, a stationary cyclic loading (using one actuator) or a simulated moving train loading (using all eight actuators). Three test cases were performed to demonstrate the capacity of the proposed test facility. The first case was to test the load-sharing ratio of fasteners beneath the rails to determine the load distribution on the track slab. A formula, based on the test results, was proposed to determine the transfer process of the loads between the train wheel and the rail fasteners. The second case was a stationary cyclic loading test, which applied loads with varying frequencies to the rails using a single actuator. The resonance frequency of the track/embankment/soil system was determined in these tests to be about 16 Hz, which coincided with theoretically computed results and field measurements. The final case was to simulate the dynamic excitation resulting from the passage of a train on the track at various speeds (up to 360 km/h). The test results on track vibrations in the physical model test showed reasonably good agreement with field measurements. These three test cases fully demonstrate the ability of the newly developed full-scale test facility to simulate dynamic excitation from trains and its ability to explore the dynamic performance of railway structures under train loadings.

Development of Test Rig for High-Speed Railway Rolling Bearings

Development of Load System for High-Speed Railway Rolling

Loading Design for Comprehensive Performance Test Bench of Drive Axle Assembly

Research on Test System of Comprehensive Transmission Performance of Wide-range Gears

Explicit Dynamics Simulation of High-Speed Railway Bearing Based On ANSYS/LS-DYNA

Development of the High-speed Sliding-rolling Contact Friction Testing Machine

Study on dynamic performance of high-speed railway vehicle using roller rig and numerical simulation

Study on the vibration characteristics of double-row tapered roller bearings for high-speed rail axle box

Analysis on Load Distribution of High-Speed Railway Axle Box Bearings

A Novel Full-Scale Test Facility for Ballastless High-Speed Railroad with Simulated Train Moving Loads

Contact Lubrication Performance of Axle Bearing Assembly of Railway Passenger Cars under the High Speed Condition

Measured dynamic load distribution within the in situ axlebox bearing of high-speed trains under polygonal wheel–rail excitation

Testing Technology for Prestressed Track Beams of Shanghai Maglev Railway

Research on the change in lubrication state and temperature control strategy of high-speed train axle box bearings using non-destructive testing

A full-scale physical model test apparatus for investigating the dynamic performance of the slab track system of a high-speed railway

Design and Research of New Type High-speed Hydrostatic Spindle Test Rig

Simulating Train Moving Loads in Physical Model Testing of Railway Infrastructure and Its Numerical Calibration

Research on Load Characteristics of Axle-Box Bearing Raceway under Wheel-Rail Excitation

Study on the gear-rack meshing dynamic performance based on a multi-body dynamic model of rack rail vehicle

Analysis of vibration and temperature on the axle box bearing of a high-speed train

Development of Test Rig for Engine Crankshaft Thrust Bearing