Abstract:High sound quality and low radiated noise are two dominant demands for the vibro-acoustic performance of internal combustion engines. Such engines with high acoustic quality will greatly improve the acoustic environment both inside and outside of the passenger compartment of an automobile. In this paper, this performance of the block of a four-cylinder diesel engine was simulated and bench-tested. Then the vibro-acoustic problems were diagnosed and optimized. The finite element analysis method was adopted to numerically analyze the natural modes of the block. The finite-element model of the block was verified by the experimental modal analysis utilizing the single-input and multiple-output technology. The results indicate that the modal frequency errors from the simulation and experiment are permissible in respect of engineering and the accuracy of the finite-element model highly matching the real one is validated. Then, the flexible multi-body dynamics model of the diesel engine was constructed and excited by the boundary conditions comprised of in-cylinder gas pressures, cylinder liner-piston contact induced lateral forces and valve system motion induced impact forces. The simulated vibration velocity levels from the block surface were obtained under the rated condition (75kW/3600rpm) and well verified by the bench test. Boundary element analysis method was employed to acquire the radiated acoustic pressures from the block surface in the frequency range of interest. Optimized schemes are implemented to the block surface in order to reduce the radiated noise and enhance the sound quality of the diesel engine. Finally, the optimal block was cast. And the bench-test results indicate that the sound quality of the new-block engine is substantially improved. The research achievements validate the feasibility and reliability of the optimal design for the block.

Study on Noise Emission of Engine Block Based on Numerical Simulation

Prediction method of radiated noise by engine block

Prediction of Engine Block's Radiation Noise and Low-Noise Design

Integrated Virtual-Design Methods for Forecasting Radiated Noise of Single Cylinder Diesel Block

Vibration Analysis of an Engine Cylinder Block

Finite Element Method Simulation Analysis for Sound Field of Exhaust Muffler

The Holistic Finite Element Model Analysis of Diesel Engine

Numerical Simulation and Structure Optimization of Compressor Muffler

Dynamic simulation research on diesel engine's cranktrain and block

Numerical Analysis Of Noise Radiation Of Compressor Shell Considering Lubrication Oil

Sound quality improvement for a four-cylinder diesel engine by the block structure optimization

Application of Virtual Prediction Method to Low-Noise Diesel Engine Design

Numerical Analysis of Acoustic Characteristic of Muffler with Complicated Structure and Structural Optimization

A Study on Heat Transfer Model for the Dynamic Contact Boundary Between Piston Ring and Cylinder Liner

The Simulation Analysis of Radiated Noise from a Gearbox Cover of Motorcycle

Experimental Validation of Sound Quality Simulation and Optimization of a Four-Cylinder Diesel Engine

Coupled optimization of internal combustion engine radiated noise and interior noise

Simulation of In-Cylinder Radiative Heat Transfer of Diesel Engine with Monte-Carlo Method

The Strength Analysis of Cylinder Block and the Fatigue Life Prediction of Main Bearing Block for a Diesel Engine

Calculation of the Radiation Heat Transfer in Cylinder of Diesel Engine by the Monte-Carlo Method

Study on the Influence of Torsional Vibration on Cylinder Block Vibration