Abstract:In order to study the influence of mechanical constraints and thermal state on thermoelastic contact nonlinear problem that between cylinder head and cylinder head gasket, a four-body contact simplified model of cylinder head-cylinder head gasket-engine block-bolts was built based on a four-valve diesel engine.Under different bolt preload and thermal state, contact state and deformation of cylinder head plate were calculated by using Augmented Lagrange multipliers as the contact algorithm.Then the influence of contact stresses and nodal displacements of mechanical constraints on some parts of the cylinder head plate were revealed in rated thermal state condition.Moreover the effect of different thermal state on the results was similarly revealed.The study makes clear that, when preload maintains the rated value and burst pressure is exerted, contact stresses in rated thermal state condition of the parts on cylinder head plate that against the cylinder ring and around the screw, which is on exhaust valve side, are similar with those values in cold state, while nodal displacements are reduced, and in different thermal states, the rates of change among the nodal displacements around the screw and both contact stresses and nodal displacements that against the cylinder ring are all less than 2%;with few exceptions, contact stresses and nodal displacements of these parts of the cylinder head plate increase with the increases of the bolt preload.The results also show that cylinder head gasket sealing tests in normal temperature condition is roughly adequate to practical state.

The Strength Analysis of Cylinder Block and the Fatigue Life Prediction of Main Bearing Block for a Diesel Engine

Analysis of thermal-mechanical coupling strength and fatigue life of cylinder head

FEM-based Multi-field Coupling Stress Analyses of the Cylinder-bolts System in a Gas Turbine Power Plant

Coupling analysis of cylinder block for two-stroke aviation piston engine

Nonlinear Contact Analysis on Main Components of Model 1130 Diesel Engine

Vibration Analysis of an Engine Cylinder Block

Determination on the Operation Condition of Crankshaft of Diesel Engine and Its Static Strength Analysis

Force and Motion Analysis of Crankshaft and Mainshaft of a Diesel Engine

Finite element analysis of a vehicle diesel engine crankshaft

Fatigue Crack Diagnosis of Engine-Block by Time Series Analysis

Measurement of Dynamic Stresses and Temperatures of Main Bearing Walls and Caps on an Engine Block

Component Structural Equivalent Research Based on Different Failure Strength Criterions and the Theory of Critical Distance

Study on Elasticity Semi-analysis of Functionally Structure for Vehicle Engine Cylinder Blocks

Fatigue analysis of marine diesel engine crankshaft

Fatigue Crack Identification Method Based on Relative Change of Strain in Engine Block

Fatigue Life Analysis and Improvement of Diesel Engine Crankshaft Based on Bending Fatigue Test

Dynamic simulation research on diesel engine's cranktrain and block

Integrated Virtual-Design Methods for Forecasting Radiated Noise of Single Cylinder Diesel Block

Study on Thermoelastic Contact of Cylinder Head-Cylinder Head Gasket-Engine Block

FINITE ELEMENT ANALYSIS OF STRENGTH OF DIESEL ENGINE CRANKSHAFT BASED ON SPRING SUPPORT

Prediction of Engine Block's Radiation Noise and Low-Noise Design