Abstract:High sound quality and low radiated noise are two dominant demands for the vibro-acoustic performance of internal combustion engines. Such engines with high acoustic quality will greatly improve the acoustic environment both inside and outside of the passenger compartment of an automobile. In this paper, this performance of the block of a four-cylinder diesel engine was simulated and bench-tested. Then the vibro-acoustic problems were diagnosed and optimized. The finite element analysis method was adopted to numerically analyze the natural modes of the block. The finite-element model of the block was verified by the experimental modal analysis utilizing the single-input and multiple-output technology. The results indicate that the modal frequency errors from the simulation and experiment are permissible in respect of engineering and the accuracy of the finite-element model highly matching the real one is validated. Then, the flexible multi-body dynamics model of the diesel engine was constructed and excited by the boundary conditions comprised of in-cylinder gas pressures, cylinder liner-piston contact induced lateral forces and valve system motion induced impact forces. The simulated vibration velocity levels from the block surface were obtained under the rated condition (75kW/3600rpm) and well verified by the bench test. Boundary element analysis method was employed to acquire the radiated acoustic pressures from the block surface in the frequency range of interest. Optimized schemes are implemented to the block surface in order to reduce the radiated noise and enhance the sound quality of the diesel engine. Finally, the optimal block was cast. And the bench-test results indicate that the sound quality of the new-block engine is substantially improved. The research achievements validate the feasibility and reliability of the optimal design for the block.

Vibration Analysis of an Engine Cylinder Block

The Holistic Finite Element Model Analysis of Diesel Engine

A General Approach to Tune the Vibration Properties of the Mounting System in the High-Speed and Heavy-Duty Engine

Dynamic simulation research on diesel engine's cranktrain and block

Study on Noise Emission of Engine Block Based on Numerical Simulation

Integrated Virtual-Design Methods for Forecasting Radiated Noise of Single Cylinder Diesel Block

The Strength Analysis of Cylinder Block and the Fatigue Life Prediction of Main Bearing Block for a Diesel Engine

Dynamic Sensitivity Analysis of Complex Structure Based on FEM

Prediction method of radiated noise by engine block

Measurement of Dynamic Stresses and Temperatures of Main Bearing Walls and Caps on an Engine Block

Sound quality improvement for a four-cylinder diesel engine by the block structure optimization

Study on the Influence of Torsional Vibration on Cylinder Block Vibration

Prediction of Engine Block's Radiation Noise and Low-Noise Design

Virtual Improving Design and Performance Prediction for 6108G Diesel Engine Block

Fatigue Crack Diagnosis of Engine-Block by Time Series Analysis

Nonlinear Contact Analysis on Main Components of Model 1130 Diesel Engine

The Statics and Modal Analysis of the Fuel Batteries Engine Main Frame Based on FEM

Experimental Investigation Using Laser Vibrometer and Finite Element Modeling for Modal Analysis of Camshaft

Study on Elasticity Semi-analysis of Functionally Structure for Vehicle Engine Cylinder Blocks

Finite element analysis of a vehicle diesel engine crankshaft

Analysis of thermal-mechanical coupling strength and fatigue life of cylinder head