Abstract:High sound quality and low radiated noise are two dominant demands for the vibro-acoustic performance of internal combustion engines. Such engines with high acoustic quality will greatly improve the acoustic environment both inside and outside of the passenger compartment of an automobile. In this paper, this performance of the block of a four-cylinder diesel engine was simulated and bench-tested. Then the vibro-acoustic problems were diagnosed and optimized. The finite element analysis method was adopted to numerically analyze the natural modes of the block. The finite-element model of the block was verified by the experimental modal analysis utilizing the single-input and multiple-output technology. The results indicate that the modal frequency errors from the simulation and experiment are permissible in respect of engineering and the accuracy of the finite-element model highly matching the real one is validated. Then, the flexible multi-body dynamics model of the diesel engine was constructed and excited by the boundary conditions comprised of in-cylinder gas pressures, cylinder liner-piston contact induced lateral forces and valve system motion induced impact forces. The simulated vibration velocity levels from the block surface were obtained under the rated condition (75kW/3600rpm) and well verified by the bench test. Boundary element analysis method was employed to acquire the radiated acoustic pressures from the block surface in the frequency range of interest. Optimized schemes are implemented to the block surface in order to reduce the radiated noise and enhance the sound quality of the diesel engine. Finally, the optimal block was cast. And the bench-test results indicate that the sound quality of the new-block engine is substantially improved. The research achievements validate the feasibility and reliability of the optimal design for the block.

Virtual Improving Design and Performance Prediction for 6108G Diesel Engine Block

A General Approach to Tune the Vibration Properties of the Mounting System in the High-Speed and Heavy-Duty Engine

Application of Virtual Prediction Method to Low-Noise Diesel Engine Design

Prediction of Engine Block's Radiation Noise and Low-Noise Design

Integrated Virtual-Design Methods for Forecasting Radiated Noise of Single Cylinder Diesel Block

Sound quality improvement for a four-cylinder diesel engine by the block structure optimization

Vibration Analysis of an Engine Cylinder Block

Prediction method of radiated noise by engine block

Application of multi-body dynamics simulation to predict the balance performance of diesel engines

Vibration and noise reduction for a 490 diesel engine body

Dynamic simulation research on diesel engine's cranktrain and block

The Strength Analysis of Cylinder Block and the Fatigue Life Prediction of Main Bearing Block for a Diesel Engine

Experimental Validation of Sound Quality Simulation and Optimization of a Four-Cylinder Diesel Engine

Lubricating Simulation Analysis of Connecting Rod Bearing Based on AVL-EXCITE

Virtual Design and Performance Prediction of a Silencing Air Cleaner Used in an I.C. Engine Intake System

Shape Optimization and Sensitivity Analysis for Cylinder Block of 4100QB Diesel Engine

Study of NVH performance improvement for a four-cylinder diesel engine body

Simulation Analysis of the Direct Injection Engine Performance and Experimental Research

Machining Quality Prediction of Marine Diesel Engine Block Based on Error Transmission Network

Digital twin-driven optimization of gas exchange system of 2-stroke heavy fuel aircraft engine

Analysis Of Structural Dynamic Response Of Multi-Cylinder Internal Combustion Engine Block Under The Excitation Of Piston Thrust Forces