Abstract:Torsional vibration is the primary cause of engine crankshaft failure. Consequently, the reduction of engine vibration is of paramount importance for the enhancement of automotive safety and comfort. However, the lack of comprehensive insight into the damping mechanism of the torsional damper has impeded the effective control of engine torsional vibration. In order to gain insight into the vibration characteristics of the shaft system in an inline six-cylinder diesel engine, an analysis of the system's behaviour during both free and forced vibration was conducted. A mathematical relationship was deduced between the dimensions, material, operational temperature and damping properties of the silicone oil damper. The objective was to determine the optimal damping and moment of inertia of the damper, with the aim of minimizing the torsional amplitude of the sixth harmonic. The results demonstrate a reduction in the six-harmonic torsional amplitude from 0.32° to 0.14° following the installation of the damper. The mean and relative deviations between the calculated and experimental results are 0.0018° and 0.83%, respectively. To facilitate the design of the silicone oil damper, a software program, Vibsim, was developed based on Visual Studio for the design and torsional vibration analysis of the silicone oil damper. This software is reliable in calculating results and is user-friendly.

Study on the Influence of Torsional Vibration on Cylinder Block Vibration

Torsional Vibration Analysis of Automotive Engine Crankshaft

Simulation of Torsional Vibration for an Automotive Diesel Engine Crankshaft

Study on the Damping Characteristic of Semi-Active Torsional Damper Based on Combined Positive and Negative Stiffness

Vibration Analysis of an Engine Cylinder Block

Simulation Vibration Analysis of Train and Railway Continuous Steel Truss Bridge

Analysis of Flexural and Torsional Vibration for Turbogenerator Shafts on Power Impact

Study on Electromechanical Coupling Characteristics of Electric Vibration Table in High-Translational-Acceleration

Numerical Simulation of Flow-Induced Vibration on Two Circular Cylinders in Tandem Arrangement

Numerical Simulation of Turbulent Vortex Induced Vibration of a Circular Cylinder Adopted ALE Domain Decomposition Method

Study on Noise Emission of Engine Block Based on Numerical Simulation

The Study of Finite Element Model of Tosional Vibration of Diesel Crankshaft System

Finite Element Modeling of Nonlinear Active and Passive Dampers Applied to Vibration Controls

Influence of the crankshaft torsional vibration to force of bearings and noise radiation of the engine

Dynamic simulation research on diesel engine's cranktrain and block

Dynamic Modeling and Vibration Characteristics of Multibody System in Axial Piston Pump

STUDY ON AN ECCENTRIC SLIDE BLOCK BALANCING MECHANISM IN A SINGLE-CYLINDER ENGINE

Multi-body dynamics and finite element method co-simulation for crankshaft dynamical strength analysis

Torsional damper design for diesel engine: Theory and application

Simulation and Experimental Research on Piston Secondary Motion

Application of multi-body dynamics simulation to predict the balance performance of diesel engines