Abstract:A one-dimensional model of the diesel engine working process was established, and thermal boundary conditions of gases contacting with a cylinder head were determined by comparing them with the results of a routine test. A fluid-structure interaction model between the cooling water and cylinder head passages was established in which boundary conditions of cooling water were obtained by computational fluid dynamics analysis. Simultaneously, considering the pressure mechanical load in the cylinder, temperature and the stress distribution of the cylinder head were analysed by the model with a thermo-mechanical coupling load. The model was validated using the temperature hardness plug method. Four parameters of intake valve opening, exhaust valve opening, fuel supply beginning, and compression ratio were selected as influencing factors, and the thermo-mechanical coupling load of the cylinder head was optimised by the Taguchi and analysis of variance method subsequently. The study indicates that the error of the calculation model for the cylinder head’s thermal-mechanical coupling load is within ±1.5%, and the proportion of the thermal stress in the cylinder head thermal-mechanical coupling stress is above 90%. The fuel supply beginning has the greatest influence on the thermal load of the cylinder head. Based on the optimisation methods within the required power range, the maximum temperature and maximum thermo-structural coupling stress of the cylinder head are decreased by about 10.05 K and 7.13 MPa in the nose bridge area, respectively.

Analysis of thermal-mechanical coupling strength and fatigue life of cylinder head

Effect of Fire-Deck Thickness on Thermal Status of Cylinder Head

A Study on Heat Transfer Model for the Dynamic Contact Boundary Between Piston Ring and Cylinder Liner

FEM-based Multi-field Coupling Stress Analyses of the Cylinder-bolts System in a Gas Turbine Power Plant

Calculation of Finite Element of Thermal Stress and Analysis of Low-cyclic Fatigue Life for Non-central Hole Rotor of 135 MW Turbine

Thermal-fluid-structure Coupling Progressive Failure Analysis for the Type III Composite Cylinder under Localized Fire

Low cycle fatigue prediction for cylinder heads considering stress gradient and local yielding

Research on Cylinder Head Thermal State Simulation

Application of Scaled Specimens in Evaluating Thermal Fatigue Performance of Cylinder Head

Experiment and numerical simulation study of thermal fatigue of an aluminum alloy piston

Fatigue Life Prediction Based on Finite Element and Multibody Dynamics Co-Simulation

Analysis and Optimisation of Thermo-Mechanical Coupling Load of Cylinder Head Considering Fluid-Structure Interaction for a Marine High-Power Diesel Engine

Component Structural Equivalent Research Based on Different Failure Strength Criterions and the Theory of Critical Distance

The Strength Analysis of Cylinder Block and the Fatigue Life Prediction of Main Bearing Block for a Diesel Engine

Development of Analogy Method for Thermal-Fatigue Crack Propagation in Pressurized Cylinder by Using Permeation Diffusion-Fracture Model

High-cycle fatigue failure analysis of cast Al-Si alloy engine cylinder head

Modelling and fatigue reliability investigation on wear prediction of piston/cylinder pair based on friction fatigue mechanism

Assessment of Bending Fatigue Strength of Crankshaft Sections with Consideration of Quenching Residual Stress

3-D Finite Element Analysis of Microengine Cylinder Temperature Field and Heat Deformation

On High Cycle Fatigue Characteristic of Locomotive Wheels

Thermomechanical Fatigue Analysis of Diesel Engine Piston: Finite Element Simulation and Lifetime Prediction Technique