Abstract:The smart diesel program requires the engine electronic control unit to consider additional parameters, such as altitude and climatic conditions, in the mapping calibration process. A specially designed environmental simulation cabin, which can simulate environmental conditions at any longitude and dimension, would allow dynamometer testing to be performed indoors. Considering its high cost, a three-dimensional (3D) computational fluid dynamics (CFD) is needed to guide and/or complement experimental researches. As a result, the main objective of this study was to establish a 3D RANS model (i.e., reasonable computational cost and running time) that can provide in-cylinder details and predict the efficiency of a 6V150 diesel engine under varied operating conditions. A sector mesh approach was employed, considering only the compression, combustion, and expansion periods from intake valve closing to exhaust valve opening. The results indicated that the model simulated cylinder pressure agreed well with the experimental data, with relative errors of less than 6% during the primary compression, combustion, and expansion. Further, the model predicted heat release phasing was inconsistent with the experimental results, with absolute errors of less than one crank angle degree for peak pressure location, CA50, and ignition delay. In addition, the multidimensional model captured the effects of environmental pressure and temperature on spray formation (i.e., the dominant phenomenological event). Moreover, the model reasonably reproduced the effects of engine control variables on performance and emissions. All these observations demonstrated the validity of the selection and calibration of geometry, chemistry, and submodels including turbulence, spray, heat transfer, combustion, etc. Overall, the model was deemed capable of predicting combustion characteristics under extreme conditions, including high-temperature, high-cold, and high-altitude environments, which can facilitate the development of smart engines.

3-D Finite Element Analysis of Microengine Cylinder Temperature Field and Heat Deformation

Analyzing Performance of Automobile Brake Drum in 3D Thermo-elastic Coupling Field

Effect of Fire-Deck Thickness on Thermal Status of Cylinder Head

CFD Calculation and Analysis of Cooling Jacket Flow and Heat Transfer for Car Engine

A Study on Heat Transfer Model for the Dynamic Contact Boundary Between Piston Ring and Cylinder Liner

The Theoretical and Experimental Study of Temperature Change Effect of Cylinder Head Material

Study of Different Cooling Structures on the Thermal Status of an Internal Combustion Engine

Analysis of thermal-mechanical coupling strength and fatigue life of cylinder head

Analysis of Thermal Boundary Condition and FEA Calculation of Temperature Field for the Exhaust Valve of Diesel Engine

Study of In-Cylinder Heat Transfer Boundary Conditions for Diesel Engines under Variable Altitudes Based on the CHT Model

Three-Dimensional Computational Fluid Dynamics Modeling of a 6V150 Diesel Engine

Optimization of Motor Heat Dissipation Systems Based on Three Dimensional Flow Field Analysis

Thermal and Conjugate Heat Transfer Analysis of Exhaust Manifold of Multi-cylinder IC Engine

Couple CFD-FE-Analysis for a Gasoline Engine Exhaust Manifold of Thermal Load

Research on Cylinder Head Thermal State Simulation

Analysis and Optimisation of Thermo-Mechanical Coupling Load of Cylinder Head Considering Fluid-Structure Interaction for a Marine High-Power Diesel Engine

Simulation and Experimental Study on Thermal State of Engine Compartment of Commercial Vehicle

A space-time averaged steady-state heat transfer model and its application in Wankel rotary engines

CFD Three-Dimensional Numerical Calculation on Flow and Heat Transfer of Cooling-Water in Engine Cylinder Cooling Jacket

Multidimensional Computational Fluid Dynamics Combustion Process Modeling of a 6V150 Diesel Engine

Heat Transfer and Thermal Load Analysis of Exhaust Manifold