Abstract:The working environment of the diesel exhaust manifold is harsh. On one hand, exhaust gas with high temperature continues to flush on the inner wall of the manifold, and on the other hand, the manifold is also affected by some complex factors, such as diesel engine vibration. If the design is unreasonable, air leakage, cracking, and other failure phenomena are easy to appear. In this article, aiming at the aforementioned problems in the exhaust manifold design process, a high-speed diesel exhaust manifold is taken as an example and analyzed by computational fluid dynamics and finite element method technology. The temperature field distribution of the exhaust manifold is simulated by the fluid–structure interaction method, and then the thermal stress distribution is simulated based on the temperature field of the exhaust manifold. According to the thermal stress of the exhaust manifold and the vibration stress in three directions (axial, transverse, and vertical), combined with the time domain acceleration signals, the high-cycle fatigue life of the exhaust manifold is obtained. The exhaust manifold structure is optimized based on the minimum high-cycle fatigue life position. Then, the high-cycle fatigue life analysis of the optimized structure shows that the optimized structure can significantly improve the life of the exhaust manifold. Then, the optimized structure is further analyzed for low-cycle fatigue life to check whether it meets the requirements of low-cycle fatigue life. After simulation, it can be known that the low-cycle fatigue life meets the design requirements. Finally, sensitivity analysis of the fatigue life under different loading conditions (thermal load and vibration intensity) shows that the thermal load has a significant influence on the fatigue life, so the thermal load should be paid attention to in the design process.

Heat Transfer and Thermal Load Analysis of Exhaust Manifold

Nonlinear Transient Analysis of Butt Welding Based on Finite Element Method

Couple CFD-FE-Analysis for a Gasoline Engine Exhaust Manifold of Thermal Load

Numerical simulation of thermal loads for engine exhaust manifold

The fluid-solid coupling thermal analysis on an engine exhaust manifold

Thermal and Conjugate Heat Transfer Analysis of Exhaust Manifold of Multi-cylinder IC Engine

A Study on Heat Transfer Model for the Dynamic Contact Boundary Between Piston Ring and Cylinder Liner

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

Analysis of thermal-mechanical coupling strength and fatigue life of cylinder head

Experimental and simulative failure analysis of reformer furnace outlet manifolds serviced in aromatic plant

Marine Diesel Exhaust Manifold Failure and Life Prediction under High-Temperature Vibration

Analysis of Thermal Boundary Condition and FEA Calculation of Temperature Field for the Exhaust Valve of Diesel Engine

Stress analysis of heat exchange tube with inner and outer fins under convection heat transfer conditions

Thermo-Mechanical Coupling Finite Element Analysis of Blast Furnace Copper Staves

3-D Finite Element Analysis of Microengine Cylinder Temperature Field and Heat Deformation

Effect of Lateral Fin Profiles on Stress Performance of Internally Finned Tubes in a High Temperature Heat Exchanger

Numerical Modelling of Heat Transfer in Engine Exhaust Manifolds

Effect of inlet manifold structure on the performance of the heater core in the automobile air-conditioning systems

Simulation Based Thermal Fatigue Validation Test Development for Exhaust Manifold

FEM Analysis of Temperature and Stress Fields of Mould Wall in Continuous Casting of Steel Billet

Optimization Strategy of Exhaust Manifold Based on Numerical Simulation