Abstract:In order to study the influence of mechanical constraints and thermal state on thermoelastic contact nonlinear problem that between cylinder head and cylinder head gasket, a four-body contact simplified model of cylinder head-cylinder head gasket-engine block-bolts was built based on a four-valve diesel engine.Under different bolt preload and thermal state, contact state and deformation of cylinder head plate were calculated by using Augmented Lagrange multipliers as the contact algorithm.Then the influence of contact stresses and nodal displacements of mechanical constraints on some parts of the cylinder head plate were revealed in rated thermal state condition.Moreover the effect of different thermal state on the results was similarly revealed.The study makes clear that, when preload maintains the rated value and burst pressure is exerted, contact stresses in rated thermal state condition of the parts on cylinder head plate that against the cylinder ring and around the screw, which is on exhaust valve side, are similar with those values in cold state, while nodal displacements are reduced, and in different thermal states, the rates of change among the nodal displacements around the screw and both contact stresses and nodal displacements that against the cylinder ring are all less than 2%;with few exceptions, contact stresses and nodal displacements of these parts of the cylinder head plate increase with the increases of the bolt preload.The results also show that cylinder head gasket sealing tests in normal temperature condition is roughly adequate to practical state.

Measurement of Dynamic Stresses and Temperatures of Main Bearing Walls and Caps on an Engine Block

Vibration Analysis of an Engine Cylinder Block

A Study on Heat Transfer Model for the Dynamic Contact Boundary Between Piston Ring and Cylinder Liner

Study on Thermoelastic Contact of Cylinder Head-Cylinder Head Gasket-Engine Block

The Strength Analysis of Cylinder Block and the Fatigue Life Prediction of Main Bearing Block for a Diesel Engine

FEM-based Multi-field Coupling Stress Analyses of the Cylinder-bolts System in a Gas Turbine Power Plant

Effect of Fire-Deck Thickness on Thermal Status of Cylinder Head

Numerical Simulation of Thermal Stress of Diesel Engine Cylinder Block Castings Under Two Different Constraints

Fatigue Crack Diagnosis of Engine-Block by Time Series Analysis

Analysis of thermal-mechanical coupling strength and fatigue life of cylinder head

The Direct Measurement of the Cylinder Block Dynamic Characteristics Based on a Non-Contact Method in an Axial Piston Pump

Residual stress measurement in engine block—an overview

Thermal stresses analysis of an engine cylinder block casting based on finite difference Meshes

Numerical Simulation of Thermal Stress and Deformation of Engine Block Iron Casting

Dynamic simulation research on diesel engine's cranktrain and block

Nonlinear Contact Analysis on Main Components of Model 1130 Diesel Engine

Virtual design of rigidity for valve train system in internal combustion engine

Normal Load of Internal Combustion Engine Junction Based on Fractal Theory of Thermal Elasto-Plastic Contact

Fatigue Crack Identification Method Based on Relative Change of Strain in Engine Block

Development of the High-speed Sliding-rolling Contact Friction Testing Machine

Research on Cylinder Head Thermal State Simulation