Abstract:Sn-40 at.%Mn peritectic alloys in which both primary and peritectic phase are intermetallic compounds were directionally solidified at different growth rates (1 gm/s-100 gm/s). Dendritic growth of primary phase has been observed even at low growth rate, and dependence of microstructural characteristic length scales on growth rate has been investigated. Liquidus slope is the dominating factor in determining non-faceted/faceted solid/liquid morphology. Experimental results show that: lambda(1) = 229.64v(-0.20), lambda(2) = 33.337v(-0.34), lambda(3) = 39.90v(-0.378), R = 16.90v(-0.384). Besides, both lambda(1)/lambda(2) and lambda(1)/lambda(3) vary greatly with increasing growth rates while lambda(2)/R ranges from 2 to 2.3 with increasing growth rate. Both the peritectic reaction and solute distribution of intermetallic compounds during solidification influence these length scales. A modified solute distribution coefficient which is appropriate for intermetallic compounds makes calculation agree reasonably well with experimental results. The value of lambda(1) is influenced more by solute distribution of intermetallic compounds, while growth of lambda(2), lambda(3) and R are more significantly influenced by the peritectic reaction. (C) 2014 Elsevier Ltd. All rights reserved.

Microstructure Formation at Low Velocity During Directional Solidification of Pb-Bi Peritectic Alloys

Banding Structure Formation During Directional Solidification of Pb–Bi Peritectic Alloys

Phase and Microstructure Selection in Directional Solidification of Pb-Bi Peritectic Alloys

Microstructure Formation During Unidirectionally Solidified Pb-Bi-Sn Tenary Quasi-Peritectic Alloy

Microstructure Formation in Pb-30wt.%Bi Peritectic Alloy

Directional Solidification of Cu–20Sn Alloy at Low Speed: from Peritectic Coupled Growth to Banding

Microstructure Evolution of Directionally Solidifi Ed Sn-16%Sb Hyperperitectic Alloy

Phase and Microstructure Selection in Directionally Solidified Peritectic Alloys with Convection

Peritectic Transformation and Primary Α-Dendrite Dissolution in Directionally Solidified Pb–26%Bi Alloy

Peritectic Reaction and Its Influences on the Microstructures Evolution During Directional Solidification of Fe–Ni Alloys

Microstructure Evolution of Cu-Pb Monotectic Alloys During Directional Solidification

Formation Mechanism of Band Structure and Phase Selection During Directional Solidification of Peritectic Alloys - Ii. Phase Selection

Microstructure Evolution of Ti-Al Peritectic System During the Initiated Stage of Directional Solidification

Convection Effects and Banding Structure Formation Mechanism During Directional Solidification of Peritectic Alloys I. Experimental Result

On oscillatory microstructure during cellular growth of directionally solidified Sn–36at.%Ni peritectic alloy

Directional Solidification and Microstructure Selection for Ti-Al Peritectic Alloy

Non-equilibrium solidification of bulk undercooled Ni–P eutectic alloys

Primary Dendrite Arm Spacing During Unidirectional Solidification of Pb–Bi Peritectic Alloys

Convection Effects and Banding Structure Formation Mechanism During Directional Solidification of Peritectic Alloys Ii. Theoretical Analysis

Microstructural Control of TiAl–Nb Alloys by Directional Solidification

Microstructural Length Scales in Directionally Solidified Sn-40 At.%mn Peritectic Alloy Containing Intermetallic Compounds