Abstract:The stability and safety of selective catalytic reduction (SCR) systems are threatened by potential catalyst blockages caused by fly ash deposition. This paper proposes to improve the blockage resistance of denitration catalysts for sintered fly ash through particle conditioning. X-ray fluorescence spectroscopy, scanning electron microscopy, and laser particle analyzer were combined with laboratory heating experiments and field tests for systematic research. The results indicate that the composition and morphology of sintered fly ash are intrinsic factors contributing to catalyst blockage, while heating conditions act as external triggers. The sintered fly ash primarily exhibits a fluffy, branched cotton-like structure. Its main components are K2O, Fe2O3, Na2O, and CaO, with the alkali metal oxides of potassium and sodium comprising 20% to 50%. At ambient temperature, sintered fly ash presents no agglomeration, but significant agglomeration occurs as temperature increases. Particle conditioning effectively inhibits the agglomeration tendency of sintered fly ash. Field tests show that catalyst activity remains unaffected even under severe blockage conditions. The pressure drop across the catalyst layers increases progressively, with the first layer displaying the least pressure drop and the third displaying the most. After particle conditioning, the pressure drop across the catalyst is stabilized at values below 600 Pa, effectively mitigating the blockage issue in the denitrification catalyst for sintering flue gas. This research provides critical technical support for the stable ultra-low emission of NOx from sintering flue gas.

De-NOx Performance of Modified Fly Ash Supporting SCR Catalyst Under Various Molding Techniques

Fe And/or Mn Oxides Supported on Fly Ash-Derived SBA-15 for Low-Temperature NH3-SCR

Integrated Gas and Solid Model to Determine the Flow Performance in the SCR Reactor

The denitration mechanism of fly ash catalysts prepared by low-temperature plasma technology

Effects Of Promoters And Active Components On Performance Of Honeycomb Scr De-Nox Catalysts

Gd-Mn-Ti Composite Oxides Anchored on Waste Coal Fly Ash for the Low-Temperature Catalytic Reduction of Nitrogen Oxide

Advanceson improving the attrition resistance of molecular sieve catalysts for fluidized bed

Particle Conditioning for Improving Blockage Resistance of Denitration Catalysts in Sintering Flue Gas

Research on Performance and Mechanism of the NH3-SCR Reaction over Fly Ash-derived Mn-Ce/Zeolite X

Enhancement Of Scr Performance Of Monolithic Mn-Ce/Al2o3/Cordierite Catalysts By Using Modified Deposition Precipitation Method

The Industrial Feasibility Of Low Temperature Deno(X) In The Presence Of Sox: A Project Case In A Medium Coking Plant

Preparation of coal fly ash supported high-temperature SCR catalyst by a novel alkali-acid combined activation

In Situ DRIFTS Investigation on CeOx Catalyst Supported by Fly-Ash-Made Porous Cordierite Ceramics for Low-Temperature NH3-SCR of NOX

Investigation of modified carbon-based catalyst on low-temperature selective reduction of flue gas denitration performance

Study on denitration and sulfur removal performance of Mn–Ce supported fly ash catalyst

Selective catalytic reduction of NO by ammonia with fly ash catalyst☆

Novel Mnox-Ceo2 Nanosphere Catalyst for Low-Temperature Nh3-Scr

Review of the Deactivation of Selective Catalytic Reduction DeNOx Catalysts

Study on smallscale commercial test of denitrification catalyst modified by fly ash

Ultralow-Temperature NOx Reduction over SmMn2O5 Mullite Catalysts Via Modulating the Superficial Dual-Functional Active Sites

Three-Dimensional Spherical CuCoAlO<sub><i>x</i></sub> Catalyst with a Micro-/Nanoporous Structure for Low-Temperature CO-SCR Denitration