Abstract:A novel method of high-efficiency extraction of aluminum (Al) and lithium (Li) from coal fly ash (CFA) is proposed. The mixture of CFA and sodium pyrosulfate (Na2S2O7) was subjected to mechanochemical activation, followed by the addition of sodium persulfate (Na2S2O8) for pressure leaching. The results indicated that the leaching efficiency of Al and Li reached 95.58% and 71.59% for treatment at the molar ratios of Na2S2O7/Al2O3 of 3:1, ball milling of 60 min, molar ratios of Na2S2O8/Al2O3 of 8:1, liquid-solid ratio of 4:1, reaction time of 120 min and temperature of 200 °C, then continued to increase the temperature to 230 °C, 95.45% Li leaching can be further achieved. Leaching residues were studied by multiple solid phase analysis techniques to elucidate the leaching mechanism. It was found that the mechanochemical activation of Na2S2O7 effectively broke a portion of Si–O–Al bonds in CFA to form aluminum tri-sodium sulfate, the Na2S2O8 was decomposed into hydrogen sulfate (HSO4 −) and hydrogen peroxide (H2O2) during the pressure leaching, the oxygen released by H2O2 together with water vapor would create a high-pressure environment, allowing HSO4 − to further disintegrate the Si–O–Al and Si–O bonds, ultimately releasing Al and Li. The extraction kinetics confirmed that the extraction process could be expressed well by the combination of the chemical reaction and interior diffusion, and the apparent activation energies of Al and Li were 28.61 kJ/mol and 26.79 kJ/mol at the temperature range of 140∼200 °C. This finding provides insight into more efficient recovery of Al and Li from CFA.

Preparation of coal fly ash supported high-temperature SCR catalyst by a novel alkali-acid combined activation

Mechanical Activation of Coal Fly Ash for the Improvement of Alumina–Silica Separation During Reduction Roasting–Alkaline Leaching Process

Efficient Activation of Coal Fly Ash for Silica and Alumina Leaches and the Dependence of Pb(II) Removal Capacity on the Crystallization Conditions of Al-MCM-41

Fe And/or Mn Oxides Supported on Fly Ash-Derived SBA-15 for Low-Temperature NH3-SCR

Pretreatment of Coal Fly Ash via Microwave Heating and Silicon Fusing for Synthesis of Zeolites

Coal fly ash to Y zeolite of great purity and crystallinity: A new and green activation method of combined in situ microwave and ultrasound

Sustainable Preparation of Highly Efficient Copper Ferroaluminosilicate CHA Zeolite for Selective Catalytic Reduction of NOx with NH3

Effects of Sodium Carbonate and Sodium Chloride Additives on Alkaline Fusion of Coal Fly Ash

High-efficiency extraction of aluminum and lithium from coal fly ash using a novel sodium pyrosulfate mechanochemical activation - Sodium persulfate pressure leaching technology

Preparation of Coal Fly Ash-Based Fenton-like Catalyst and Its Application for the Treatment of Organic Wastewater under Microwave Assistance

Re-using of coal-fired fly ash for arsenic vapors in-situ retention before SCR catalyst: Experiments and mechanisms

Kinetics of Aluminum and Scandium Extraction from Desilicated Coal Fly Ash by High-Pressure HCl Leaching

Functionalized Coal Fly Ash Is an Efficient Catalyst for Synthesizing Furfural from Xylose at a Low Catalyst Load

Development of One-Step Synthesized SO42−/ZrO2-fly Ash (SZ@FA) Solid Acid Catalysts for Energy-Efficient Sorbent Regeneration in CO2 Capture Processes.

Synthesis of Zeolite/Aluminum Oxide Hydrate from Coal Fly Ash: A New Type of Adsorbent for Simultaneous Removal of Cationic and Anionic Pollutants

Enhanced Desilication of High Alumina Fly Ash by Combining Physical and Chemical Activation

Activation Pretreatment and Leaching Process of High-Alumina Coal Fly Ash to Extract Lithium and Aluminum

The Enhanced Resistance to Na+-poisoning of MnCoCrOx SCR Catalyst by Acidity Regulation: the Mechanism of Sulfuric Acid Pretreatment

Comprehensive Extraction of Silica and Alumina from Coal Fly Ash via Reduced and Oxidized Roasting-Low Temperature Alkaline Leaching and Bayer Digestion

Extraction and Value-Added Utilization of Alumina from Coal Fly Ash Via One-Step Hydrothermal Process Followed by Carbonation

In-situ Interzeolite Transformation Synthesis Cu-SSZ-13 from Coal Fly Ash-derived Zeolite for NH3-SCR Reaction