Abstract:Currently, activated coke is widely used in the removal of multiple pollutants from industrial flue gas. In this paper, a series of novel FexLayOz/AC catalysts was prepared by the incipient wetness impregnation for NH3-SCR denitrification reaction. The introduction of Fe-La bimetal oxides significantly improved the denitrification performance of activated coke at mid-high temperature, and 4% Fe0.3La0.7O1.5/AC exhibited a superior NOx conversion efficiency of 90.1% at 400 °C. The catalysts were further characterized by BET, SEM, XRD, Raman, EPR, XPS, FTIR, NH3-TPD, H2-TPR, et al., whose results showed that the perovskite-type oxide of LaFeO3 and oxygen vacancies were produced on the catalysts’ surfaces during roasting. Fe-La doping enhanced the amount of acid sites (mainly Lewis and other stronger acid sites) and the content of multifarious oxygen species, which were beneficial for NOx removal at mid-high temperature. Moreover, it was investigated that the effect of released CO from activated coke at mid-high temperature on the NOx removal through the lifetime test, in which it was found that a large amount of CO produced by pyrolysis of activated coke could promote the NOx removal, and long-term escaping of CO on the activated coke carrier did not have a significant negative impact on catalytic performance. The results of the TG-IR test showed that volatile matter is released from the activated coke while TG results showed that the weight loss rate of 4% Fe0.3La0.7O1.5/AC only was 0.0015~0.007%/min at 300–400 °C. Hence, 4% Fe0.3La0.7O1.5/AC had excellent thermal stability and denitrification performance to be continuously used at mid-high temperature. Finally, the mechanisms were proposed on the basis of experiments and characterization results.

Study on smallscale commercial test of denitrification catalyst modified by fly ash

The denitration mechanism of fly ash catalysts prepared by low-temperature plasma technology

Investigation of modified carbon-based catalyst on low-temperature selective reduction of flue gas denitration performance

Experimental Investigation into the Denitrification Performance of a CuO/AC Catalyst Used for NO Reduction with Ammonia

Effect of Fly Ash on the Denitrification Performance of NH_3 at Moderate Temperatures

SELECTIVE REDUCTION DENITRIFICATION OF FLUE GAS BY USING CATALYST Ag/Al2O3 AND REDUCING AGENT C3H6

Study on the Denitrification Performance of FexLayOz/activated Coke for NH3-SCR and the Effect of CO Escaped from Activated Coke at Mid-High Temperature on Catalytic Activity.

Pilot Test Of Environment-Friendly Catalysts For The Deno(X) Of Low-Temperature Flue Gas From A Coal-Fired Plant Dagger Double Dagger

RESEARCH STATUS OF LOW-TEMPERATURE DENITRIFYING CATALYSTS

De-NOx Performance of Modified Fly Ash Supporting SCR Catalyst Under Various Molding Techniques

Particle Conditioning for Improving Blockage Resistance of Denitration Catalysts in Sintering Flue Gas

Study on denitration and sulfur removal performance of Mn–Ce supported fly ash catalyst

Formation of Fly Ash Catalysts and Selection of a Matrix Binder and Its Application in Denitration

RESEARCH ACHIEVEMENTS OF CATALYSTS FOR SCR DENITRIFICATION BY NH3 AND HYDROCARBON

Research on deeply modified Fenton sludge for the selective catalytic reduction of NO x : Promotion mechanism of acidification reorganization

Low-Temperature SCR Catalyst Development and Industrial Applications in China

Selective catalytic reduction of NO by ammonia with fly ash catalyst☆

Experimental Study on the Denitrification Performance of Calcium-based Sorbent of Mid-temperature Dry Method

Performance Evaluation and Life Management of SCR Denitration Catalyst

A Novel Nickel Catalyst Supported on Activated Coal Fly Ash for Syngas Production Via Biogas Dry Reforming

Study on Optimization Experiment of SCR Denitrification Technologies in a Coal-fired Power Plant