Abstract:Considering the technical status and existing problems of traditional silicon wafer chemical mechanical polishing (CMP), especially for the diameter of silicon wafer increasing, constantly, the surface quality and efficiency of silicon wafer polishing are becoming an urgent problem to be solved, so the research subject of ultrasonic vibration hybrid polishing new technique was proposed. By means of mechanism theoretical analysis research, firstly, the processing mechanism of hybrid polishing was studied systematically. An investigation of polishing mechanisms based on the micro-contact model between the polishing pad and the polishing surface of silicon wafer was developed. Polishing mechanism theoretical analysis shows that when ultrasonic vibrations combined with mechanical and chemical, the performance of polishing slurry is improved in the process of CMP, therefore to create favorable conditions. To verify the established theory, then, a series of experiments to investigate the traditional CMP are conducted, as well as the polishing tool with the forms of ultrasonic vibration, the polishing pad, the polishing surface quality, velocity at polishing point v, and slurry supplying Q on silicon wafer polishing. Experiment findings showed that, in the same polishing conditions, especially, hybrid polishing by ultrasonic-elliptic-vibration has gained more advantage over the effect of silicon wafer polishing. When ultrasonic-elliptic-vibration is put in polishing tool, the silicon wafer polished surface roughness Ra from the traditional method of polishing 0.077μm going down to the 0.042μm, the no-smooth rate KR which describes the polished surface morphology is significantly improved, and the material removal rate increases by 18%. Experimental research findings of the surface quality and the material removal mechanism are shown to be consistent with the theoretical analysis.

Experiment on silicon wafer edge hybrid polishing of ultrasonic vibration and chemical mechanical

Mechanism and Experimental Investigation on Silicon Wafer Hybrid Polishing by Ultrasonic-Elliptic-Vibration Chemical-Mechanical

A Hybrid Technique of Ultrasonic-Elliptic-Vibration-Assisted Chemical-Mechanical Polishing and its Experimental Investigation

Chemical-Mechanical Polishing Principle and Experimental System of Ultrasonic Elliptic Vibration

High Efficiency Processing of Si Wafer Edge by Ultrasonic Vibration Assisted Polishing

Experimental investigation of silicon wafer hybrid polishing by UEV-CMP

Experimental Investigation on Hybrid Technology of Ultrasonic Vibration Assisted Chemo-Mechanical Grinding (CMG) Silicon Wafer

Mechanism of Surface Formation of Silicon Wafer Processed by Fixed Abrasive Polishing with Assistance of Ultrasonic Vibration and Experiments

Chemical mechanical polishing of silicon carbide (SiC) based on coupling effect of ultrasonic vibration and catalysis

Optimization of polishing fluid composition for single crystal silicon carbide by ultrasonic assisted chemical-mechanical polishing

Research on the Hydrodynamic Electro-Chemical Mechanical Polishing for Silicon Wafer with Suspension Fluid

Fundamental Investigation Of Silicon Wafer Edge Treatment By Ultrasonically Assisted Polishing (Uap)

Hybrid Polishing of Fused Silica Glass with Bound-Abrasive Polishers in Conjunction with Vibration

Precision treatment of silicon wafer edge utilizing ultrasonically assisted polishing technique

A Feasibility Study of Silicon Wafer Edge Treatment by Ultrasonic Assisted Fixed-Abrasive CMP (UF-CMP)

Research on Surface Topography of Silicon Wafer in Chemical-mechanical Polishing

Mirror Surface Finishing of Silicon Wafer Edge Using Ultrasonic Assisted Fixed-Abrasive CMP (UF-CMP).

A New Approach to Silicon Wafer Edge Treatment by Ultrasonically Assisted Polishing (Uap)

High efficiency polishing of silicon carbide by applying reactive non-aqueous fluids to fixed abrasive pads

Method of Measurement Material Micro-Remove Rate of Silicon Wafer Edge Treatment by Chemical-Mechanical Polishing

An Experimental Study of Ultrasonic Vibration-Assisted Grinding of Polysilicon Using Two-Dimensional Vertical Workpiece Vibration