Abstract:A systematic study was conducted on the impact of annealing treatments on the microstructure and properties of cold-rolled Ti50Ni47Fe3 alloys using optical microscopy, scanning electron microscopy, electron backscattered diffraction, and an electronic universal testing machine. It was found that, during low-temperature annealing (400 °C and 500 °C), the annealing time had no significant effect on the microstructure or properties of the Ti50Ni47Fe3 alloy. Only elongation (δ) increased with the increase in the annealing time, and the grain orientation of the Ti50Ni47Fe3 alloy was //RD (rolling direction). When annealing at medium–high temperature (600 °C), as the annealing time increased, recrystallization and grain growth processes occurred, resulting in a continuous decrease in strength and an increase in δ. Meanwhile, it was found that the grain orientation of the cold-rolled Ti50Ni47Fe3 alloy changed from //RD during the recovery and recrystallization processes to //RD after the grain growth process. The orientation distribution function cross-section φ2 = 45° results indicate that the texture was mainly distributed along the γ orientation line (φ1 = 0~90°, Φ = 54.7°, φ2 = 45°). When annealed at 400 °C and 500 °C, the texture of the Ti50Ni47Fe3 alloys was (111)[uvw]. When the annealing treatment was 600 °C for 120 min, a (110)[uvw] texture occurred. Additionally, ductile fracture occurred in all specimens, and the crack origin was located on one side of the fracture surface, with obvious "Y"-shaped propagation. This article studied annealing treatments of cold-rolled Ti50Ni47Fe3 alloys, providing corresponding theoretical guidance for subsequent production applications.

Effects of recrystallization annealing process on development of cube textured of Ni-5at%W alloy substrate

Development and Stability During High Temperature Annealing of the Cube Texture in Rolled Ni Substrate Materials

Effect of Annealing Temperature on Cube Texture Formation in Ni7W/Ni12W/Ni7W Compound Substrate

Influence of Intermediate Annealing on the Microstructure and Texture of Ni-9.3at%W Substrates

Effect of different deformation and annealing procedures on non-magnetic textured Cu60Ni40 alloy substrates

Analysis of the Ni-5%at.W Alloy Substrate Texture Evolution at Different Strain Levels Using the EBSD Technique

Fabrication of Textured Ni–9.3at.%W Substrate by Electropulsing Intermediate Annealing Method

Evolution of Microstructure, Texture and Topography During Cold Rolling and Recrystallization of Ni–5at.%W Alloy Substrate for Coated Conductors

Preparation and Properties of Textured Ni–W Coatings Electrodeposited on the Steel Surface from a Pyrophosphate Bath

The Influence of Tensile Stress on the Recrystallization and Texture Stability of Ni–5 at % W Long Tapes

Preparation and Evaluation of Cube Texture Ni Substrate for Ybco-Coated Superconductor

Effect of Annealing Process on the Microstructure and Texture of Cold-Rolled High-Purity Al-0.5%Cu Plates

Development of the Cube Texture at Low Annealing Temperatures in Highly Rolled Pure Nickel

Effect of cross cold rolling and annealing on microstructure and texture in pure nickel

The Effect of Annealing Treatment on the Microstructure and Texture of a Cold-Rolled TiNiFe Shape Memory Alloy Tube

Deformation And Annealing Textures Of Extruded And Cold Rolled Pure Ni Single Crystals Of Cube Orientation

Effect of Annealing on the Microstructure, Texture, and Properties of Cold-Rolled Ti50Ni47Fe3 Shape Memory Alloy Sheets

Microstructure and Texture Evolution of Cu-Ni-P Alloy after Cold Rolling and Annealing

Microstructure Evolution and Recrystallization after Annealing of Tungsten Heavy Alloy Subjected to Severe Plastic Deformation

Influence of Electropulsing Treatment on the Recrystallization and Texture of Ni9W Alloy Strip

Influence Of Recrystallization Annealing On The Cube Texture In High-Purity Aluniinuni Foils