Abstract:This study proposes a simplified space vector pulse-width modulation (SVPWM) method for multilevel converters. To avoid unnecessary coordination transformations, firstly, a further derivation is conducted on the basis of the 60° coordinate transformation. Then, all the nearest three vectors (NTVs), duty cycles and optimal switching sequence within one switching period can be identified through a simple comparison of three-phase modulation waves. To further reduce the switching frequency, detailed steps to achieve the minimum number of transitions among different NTVs are constructed. Combined with the optimal switching sequence within one switching period, the minimum number of transitions within a fundamental period can be achieved easily. Finally, a thorough discussion is conducted to simplify the procedure further and the flowchart for the proposed SVPWM is also presented. Compared with the previous methods, the proposed method does not require any iterative calculation or coordinate transformation. To the best of the authors’ knowledge, the calculation amount is reduced by almost seven times compared with the methods proposed. In addition, the switching frequency and total harmonic distortions remain at the same level without any deterioration. Finally, the simulation and experiment for modular multilevel converter are performed to verify the correctness and efficiency of the proposed method.

Loss Reduction in the SVPWM Linear Modulation Region

SVPWM Strategy for Inverter Dead-Time Compensation

Dead-time Effects Analysis and Compensation of SPWM and SVPWM Inverter

Modified Single-Edge SVPWM Technique to Reduce the Switching Losses and Increase PWM Harmonics Frequency for Three-Phase VSIs

Study and Simulation of Minimum Switching Losses VSVPWM Technique

SVPWM Over-Modulation Algorithm Based on Superposition Principle

Single Active Vector Pulse-width Modulation with Improved Harmonic and Dynamic Performance for Low Carrier Ratio Applications

Synchronous Single Vector Modulation Strategy for Low-Carrier-Ratio High-Power Applications

Study on SVPWM Technique for the Switching Losses Reduction of Multi-modular Converter

The Research of Over-modulation Strategies for SVPWM Based on Classification Algorithm

Modified Single-Edge Modulation to Decrease Common-Mode Voltage with Considering Deadtime Effects and Switching Losses for Three-Phase VSIs

Fast and Simple Space Vector Modulation Method for Multilevel Converters

Analysis and Compensation Method of Dead Time Effect for Space Vector PWM Inverter

Minimum switching loss pulse width modulation for reduced power conversion loss in reactive power compensators

A Novel PWM Technique With

SVPWM Algorithm Based on Modulation Functions

An SVPWM Method for Parallel Resonant DC-Link Inverter with the Smallest Loss in the Auxiliary Commutation Circuit

Simplified SVPWM That Integrates Overmodulation and Neutral Point Potential Control

A Fast Multilevel SVPWM Method Based on the Imaginary Coordinate with Direct Control of Redundant Vectors or Zero Sequence Components

A Novel SVPWM Compensation Strategy Based on Regulating Dead Time On-Line

SVPWM Strategy of Dual Inverters and Zero-Sequence Voltage Suppression Method