Abstract:The dead-time is introduced to prevent the upper and lower power devices of the same leg from conducting simultaneously. However, it will cause the actual output voltage deviate from the desired voltage and the load current distortion will occur, which is especially unexpected when the inverter operates at a low frequency. In addition, a voltage drop is produced when the current flows through the power device, which further aggravates the current distortion. This paper presents a simple compensation strategy for the dead-time and the forward voltage drop. The current polarity is obtained accurately by filtering the three-phase currents in the synchronous rotating coordinate. The driving signals in the SVPWM is adjusted according to the current polarity to compensate the dead-time. The forward voltage drops are equivalent to an error voltage vector by using the approximate average threshold voltage and average differential resistance model, which is added to the given voltage to suppress the effects of the forward voltage drops. The compensation quantities are set to change based on a piece wise linear function to eliminate the occurrence of the current clamp and the instantaneous zero-crossing switch. Finally, the proposed compensation strategy is verified by the simulation and experiment.

Analysis and Compensation Method of Dead Time Effect for Space Vector PWM Inverter

Dead-time Effects Analysis and Compensation of SPWM and SVPWM Inverter

Dead-time Effects Analysis and Elimination for Voltage Source Inverter

Analysis of Torque Ripples of Vector-Controlled Permanent Magnet Synchronous Motors

A Novel SVPWM Compensation Strategy Based on Regulating Dead Time On-Line

A Novel Method for Dead-Time Compensation Based on SVPWM

A New Inverter Compensation Strategy Based On Adjusting Dead-Time On-Line

Compensation of Current Measurement Error in PMSM Drives Based on Virtual Windings

Modeling and Compensation for Dead-Time Effect in High Power IGBT/IGCT Converters with SHE-PWM Modulation

New method of dead time compensation based on SVPWM strategy

SVPWM Strategy for Inverter Dead-Time Compensation

A Compensation Method of Dead-Time and Forward Voltage Drop for Inverter Operating at Low Frequency

Analysis and compensation of dead-time effect in voltage source inverters considering parasitic capacitance and ripple current

Dead-time Compensation Based on the Improved Space Vector Modulation Strategy for Matrix Converter

An Online Self-regulation Dead-time Compensation Strategy

On-line dead-time compensation method for dual three phase induction machine using harmonic sub-space component

Digital Method for Dead-time Compensation of Three-phase Voltage Inverter

Non-sinusoidal Output Voltage for Multiphase Variable Speed Drives with Space Vector PWM

Analysis and compensation of dead-time effect considering parasitic capacitance and ripple current

Torque ripple analysis and reduction of permanent magnet synchronous motor

Method Analysis and Comparison of Svpwm and Spwm