Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

On-line dead-time compensation method for dual three phase induction machine using harmonic sub-space component

Detection of Inter-Turn Short Circuit Fault for Dual Three-Phase PMSM Based on Vector Space Decomposition Scheme

Compensation of Current Measurement Error in PMSM Drives Based on Virtual Windings

Harmonic Currents Injection Strategy with Optimal Air Gap Flux Distribution for Multiphase Induction Machine

A new adaptive dead time compensation method for dual three-phase permanent magnet synchronous motor

Current Measurement Error Compensation Based on Modified Multiple Complex-Coefficient Filters in PMSM Drives

Analysis and Compensation Method of Dead Time Effect for Space Vector PWM Inverter

Modeling and Compensation for Dead-Time Effect in High Power IGBT/IGCT Converters with SHE-PWM Modulation

Digital Method for Dead-time Compensation of Three-phase Voltage Inverter

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Dual Closed-Loop Control Strategy on Harmonic Plane for Multiphase Induction Motor with Harmonic Injection Based on Air-Gap Flux Orientation Control

Multiplane Rotor Resistance Online Estimation Strategy for Multiphase Induction Machine under Nonsinusoidal Power Supply

Dead-time Effects Analysis and Compensation of SPWM and SVPWM Inverter

A New Inverter Compensation Strategy Based On Adjusting Dead-Time On-Line

Dead-Time Compensation Based on a Modified Multiple Complex Coefficient Filter for Permanent Magnet Synchronous Machine Drives

An Online Self-regulation Dead-time Compensation Strategy

Analysis and compensation of dead-time effect in voltage source inverters considering parasitic capacitance and ripple current

Stator Inter-Turn Fault Detection in Closed-Loop Controlled Drive Based on Switching Sideband Harmonics in CMV

A Novel SVPWM Compensation Strategy Based on Regulating Dead Time On-Line

Dead time compensation of IPMSM based on neural network filter and current polarity detection

Harmonic and Fundamental Rotor Resistance Estimation Scheme for Multiphase Induction Motor Based on Nonsinusoidal Supply Control