Abstract:The finite control set model predictive current control(FCS-MPCC)can significantly improve the dynamic performance of the five-phase permanent magnet synchronous motor (5P-PMSM), but its control performance highly depends on the accuracy of the model parameters. The parameter error compensation based on the first-order sliding mode observer can improve the robustness of FCS-MPCC under Model parameter mismatch. The introduction of the sign function leads to chattering in the observation results. In order to eliminate this chattering, a first-order low-pass filter needs to be added for compensation. However, the introduction of filters will increase system design difficulty and bring system delays, which will affect the compensation effect. Therefore, a second-order sliding mode observer, based on the variable-gain Super-Twisting algorithm, is proposed to realize the parameter error estimation and one-beat delay compensation in this paper. By establishing the Lyapunov function, the stability proof of the proposed observer, and the calculation method of the observer parameters are given. Besides, the third harmonic current can be suppressed, and the computational burden of the control unit can be reduced by controlling the proportion of medium vector and large vector reasonably. According to the deadbeat control, the optimal virtual voltage vector action time in each cycle is obtained, which improves the tracking ability of the reference current. At last, Extensive experimental results validate that i) the proposed observer can significantly improve the robustness of model predictive current control even under parameters mismatch; ii) the proposed control method can effectively enhance the dynamic performance of the 5-phase PMSM.

Current Measurement Error Compensation Based on Modified Multiple Complex-Coefficient Filters in PMSM Drives

Compensation of Current Measurement Error in PMSM Drives Based on Virtual Windings

An Enhanced Sensorless Control Scheme for PMSM Drives Considering Self-inductance Asymmetry

Hybrid Frame-Based Current Control Scheme for LC-Equipped PMSM with Non-Sinusoidal Back-EMF

Current Control Scheme for LC-Equipped PMSM Drive Considering Decoupling and Resonance Suppression in Synchronous Complex-Vector Frame

High Robustness Current Measurement Error Compensation of SPMSM Drives Based on Discrete Fourier Transform

Current Measurement Errors Compensation Based on Current Ripple Component Decoupling for PMSM Drives

A Combined Model Predictive Current Control for SPMSM Drive with Improved Robustness and Control Precision

Virtual-Vector-Based Model Predictive Current Control of Five-Phase PMSM with Stator Current and Concentrated Disturbance Observer.

Improved Model Predictive Current Control for PMSM Drives Based on Dynamic Reference Current

Load Change Assessment-Based Feedforward Compensation for FCS-MPCC Used in PMSMs Considering Load Disturbances

Adaptive Sensorless Control of High Speed Surface-Mounted PMSM Drives with Inductance Estimator Based on Current Error

An Adaptive-Frequency Harmonic Suppression Strategy Based on Vector Reconstruction for Current Measurement Error of PMSM Drives

On-Line Compensation of Resolver Periodic Error for PMSM Drives

Accurate Two-Degree-of-freedom Discrete-Time Current Controller Design for PMSM Using Complex Vectors

Analysis and Compensation of Sampling-Delay Error in Single Current Sensor Method for PMSM Drives

Compensation of dead-time effects based on adaptive voltage disturbance estimator in PMSM drives

Current Prediction Error Reduction Method of Predictive Current Control for Permanent Magnet Synchronous Motors.

Dead-Time Compensation Based on a Modified Multiple Complex Coefficient Filter for Permanent Magnet Synchronous Machine Drives

Compensation of Current Measurement Offset Error for Permanent Magnet Synchronous Machines

An Improved Model-Free Predictive Current Control for PMSM Drives Based on Current Circle Tracking Under Low-Speed Conditions