Abstract:The finite control set model predictive current control(FCS-MPCC)can significantly improve the dynamic performance of the five-phase permanent magnet synchronous motor (5P-PMSM), but its control performance highly depends on the accuracy of the model parameters. The parameter error compensation based on the first-order sliding mode observer can improve the robustness of FCS-MPCC under Model parameter mismatch. The introduction of the sign function leads to chattering in the observation results. In order to eliminate this chattering, a first-order low-pass filter needs to be added for compensation. However, the introduction of filters will increase system design difficulty and bring system delays, which will affect the compensation effect. Therefore, a second-order sliding mode observer, based on the variable-gain Super-Twisting algorithm, is proposed to realize the parameter error estimation and one-beat delay compensation in this paper. By establishing the Lyapunov function, the stability proof of the proposed observer, and the calculation method of the observer parameters are given. Besides, the third harmonic current can be suppressed, and the computational burden of the control unit can be reduced by controlling the proportion of medium vector and large vector reasonably. According to the deadbeat control, the optimal virtual voltage vector action time in each cycle is obtained, which improves the tracking ability of the reference current. At last, Extensive experimental results validate that i) the proposed observer can significantly improve the robustness of model predictive current control even under parameters mismatch; ii) the proposed control method can effectively enhance the dynamic performance of the 5-phase PMSM.

Robust Predictive Current Control With Parallel Compensation Terms Against Multi-Parameter Mismatches for PMSMs

Robustness Analysis and Enhancement of Deadbeat Predictive Control for Permanent Magnet Linear Synchronous Machines with Asymmetric Model

A Fast Response Robust Deadbeat Predictive Current Control for Permanent Magnet Synchronous Motor

Robust Predictive Current Control for PMSM Drives with Parameter Mismatch

A Combined Model Predictive Current Control for SPMSM Drive with Improved Robustness and Control Precision

Current Prediction Error Reduction Method of Predictive Current Control for Permanent Magnet Synchronous Motors.

An Incremental Deadbeat Predictive Current Control Method for PMSM with Low Sensitivity to Parameter Variation

A Modified Deadbeat Predictive Current Control for Improving Dynamic Performance of PMSM

Model Predictive Current Control with Adaptive-Adjusting Timescales for PMSMs

Improved Model Predictive Current Control for PMSM Drives Based on Dynamic Reference Current

Robustness Improvement of Predictive Current Control for Pmlsm Integrating Adaptive Internal Model with Time Delay Compensation

Virtual-Vector-Based Model Predictive Current Control of Five-Phase PMSM with Stator Current and Concentrated Disturbance Observer.

A Robust Deadbeat Predictive Current Control Method for IPMSM

Robust Model Predictive Control for PMSM Drives Against Parameter Mismatch

Dynamic Model Predictive Current Control Based on Deviation for Permanent Magnet Synchronous Motor

A Modified Predictive Current Control with Sensitivity Analysis for Permanent Magnet Synchronous Motor

An Improved Predictive Current Control for PMLSM Considering Parameter Variation

A High-Bandwidth and Strong Robust Current Control Strategy for PMLSM Drives

Analysis and Robustness Improvement of Finite-Control-Set Model Predictive Current Control for IPMSM With Model Parameter Mismatches

Robust Fault-Tolerant Predictive Current Control for Permanent Magnet Synchronous Motors Considering Demagnetization Fault

Time-Delay Compensation Method in PMSM Servo System Based on Predictive Current Control with Sensitivity Analysis