Abstract:The modulation’s effects on the stator losses have been explored by previous studies. It confirms that the voltage vector error introduced by the PWM schemes dominants the PWM-related harmonic eddy-current loss and the PWM-related harmonic copper loss. However, the existing PWM schemes of two parallel inverter focus on the ZSCC peak reductions. They do not explore the reductions of the voltage vector error by the optimal vector sequences to suppress the stator loss. This paper aims to reduce the stator loss of the permanent magnet synchronous motor (PMSM) drive systems fed by the two parallel interleaved inverter with an optimal PWM scheme. First, this paper investigates the effects of the instantaneous voltage vector error, resulting from a PWM inverter, on the eddy-current loss and stator copper loss and reveals that a reduced voltage error reduces the eddy-current loss and stator copper loss. Then, this paper divides each 60° sector into six subsectors to minimize the voltage vector error, and with the proposed sector division, it further elects the optimal vector sequences for the subsectors, applying the minimum switching times per carrier period. Besides, the proposed optimal vector sequences are implemented through a simplified carrier-based method. The presented analysis confirms that the proposed PWM scheme can reduce the eddy-current loss, stator copper loss, and switching loss of the existing methods. Finally, the experimental results verify the theoretical analysis and optimal performance of the proposed modulation strategy.

Study and Simulation of Minimum Switching Losses VSVPWM Technique

Zero-Voltage-Switching Sinusoidal Pulsewidth Modulation Method for Three-Phase Four-Wire Inverter

Study on SVPWM Technique for the Switching Losses Reduction of Multi-modular Converter

A ZVS Grid-Connected Full-Bridge Inverter with a Novel ZVS SPWM Scheme

Zero-sequence Component Injection ZVS-PWM for Three-phase Grid Inverter with Arbitrary Power Factor Angle

Modified Single-Edge SVPWM Technique to Reduce the Switching Losses and Increase PWM Harmonics Frequency for Three-Phase VSIs

Research on Flux Linkage Locus Control with Minimum Switching Losses

Method Analysis and Comparison of Svpwm and Spwm

The Research of Over-modulation Strategies for SVPWM Based on Classification Algorithm

Generalized Space-Vector-Modulation Method for Soft-Switching Three-Phase Inverters

An SVPWM Method for Parallel Resonant DC-Link Inverter with the Smallest Loss in the Auxiliary Commutation Circuit

Non-sinusoidal Output Voltage for Multiphase Variable Speed Drives with Space Vector PWM

Loss Reduction in the SVPWM Linear Modulation Region

A Method for PWM Frequency Harmonic Suppression Using Zero-Vector Switching SVPWM Strategy in Three-Level Inverter Drive Systems

Simplified SVPWM That Integrates Overmodulation and Neutral Point Potential Control

Single Active Vector Pulse-width Modulation with Improved Harmonic and Dynamic Performance for Low Carrier Ratio Applications

Novel Virtual Vector SVPWM Method to Mitigate Low-Frequency Common Mode Voltage for Four-Level NPC Inverters

SVPWM Strategy of Dual Inverters and Zero-Sequence Voltage Suppression Method

SVPWM Strategy for Inverter Dead-Time Compensation

An Enhanced SVPWM Strategy Based on Vector Space Decomposition for Dual Three-Phase Machines Fed by Two DC-Source VSIs

A Hybrid PWM Scheme for Stator Loss Reduction of Two Parallel Interleaved Inverter-Fed PMSM Drive with a Minimized Switching Loss