A New Virtual Space Vector Modulation Technique Applied to the Ten-Switch Inverter for Common Mode Voltage Reduction

Zakaria Massaq

DOI: https://doi.org/10.1007/s13369-024-08831-y

IF: 2.807

2024-03-13

Arabian Journal for Science and Engineering

Abstract:The ten-switch inverter is recently proposed in the literature to replace the neutral clamped point three-level inverter; it can produce a two/three-level output voltage using only ten switches. The conventional modulation strategies generate a large common mode voltage (CMV), which increases the leakage current. The use of the sinusoidal pulse width modulation (SPWM) produces a high CMV of V dc /2. On the other hand, using conventional space vector modulation (SVM) methods can only reduce the CMV to V dc /3. To achieve further reduction in the magnitude of the CMV, a new virtual SVM (VSVM) strategy is suggested. The space vector diagram is constructed with virtual vectors which can generate the lowest possible CMV (| V CM |= V dc /6). In the proposed VSVM, the action times are calculated and the switching sequence is synthesized for each region. The VSVM is applied to a ten-switch inverter through a simulation, and it is validated experimentally. It is compared to some existing modulation techniques, such as the SPWM method, two SVM methods and the conventional VSVM. Simulation and experimental results showed that the proposed VSVM algorithm can effectively reduce CMV to V dc /6. The use of virtual vectors does not affect the performance of the proposed algorithm in terms of the use of the DC bus voltage. In addition, it can effectively balance the neutral point voltage. However, the analysis of voltages and currents demonstrated that the use of virtual vectors increases the rate of harmonics compared to conventional SVM methods.

multidisciplinary sciences