Abstract:The ten-switch inverter is recently proposed in the literature to replace the neutral clamped point three-level inverter; it can produce a two/three-level output voltage using only ten switches. The conventional modulation strategies generate a large common mode voltage (CMV), which increases the leakage current. The use of the sinusoidal pulse width modulation (SPWM) produces a high CMV of V dc /2. On the other hand, using conventional space vector modulation (SVM) methods can only reduce the CMV to V dc /3. To achieve further reduction in the magnitude of the CMV, a new virtual SVM (VSVM) strategy is suggested. The space vector diagram is constructed with virtual vectors which can generate the lowest possible CMV (| V CM |= V dc /6). In the proposed VSVM, the action times are calculated and the switching sequence is synthesized for each region. The VSVM is applied to a ten-switch inverter through a simulation, and it is validated experimentally. It is compared to some existing modulation techniques, such as the SPWM method, two SVM methods and the conventional VSVM. Simulation and experimental results showed that the proposed VSVM algorithm can effectively reduce CMV to V dc /6. The use of virtual vectors does not affect the performance of the proposed algorithm in terms of the use of the DC bus voltage. In addition, it can effectively balance the neutral point voltage. However, the analysis of voltages and currents demonstrated that the use of virtual vectors increases the rate of harmonics compared to conventional SVM methods.

A Novel Virtual Space Vector Modulation With Reduced Common-Mode Voltage and Eliminated Neutral Point Voltage Oscillation for Neutral Point Clamped Three-Level Inverter

New virtual space vector modultation scheme to eliminate common-mode voltage with balanced neutral-point voltage for three-level NPC Inverters

An analogous carrier‐based implementation of virtual space vector modulation with low common‐mode voltage and neutral‐point voltage oscillation elimination for three‐level NPC inverter

Novel Virtual Vector SVPWM Method to Mitigate Low-Frequency Common Mode Voltage for Four-Level NPC Inverters

An Active Virtual Space Vector Modulation Scheme for Three‐Level Neutral‐Point‐Clamped Converters

A new Zero Voltage Switching three-level NPC inverter

Common Mode Voltage Suppression for Three-Level Neutral Point-Clamped Inverters

Review on Pulse-Width Modulation Strategies for Common-Mode Voltage Reduction in Three-Phase Voltage-Source Inverters

Hybrid varied virtual vector modulation method of parallel three-level inverter considering neutral point potential and phase current balance

A Novel Low-Frequency Virtual Space Vector Modulation With the Improved Continuity of Output Average-Voltage and Bus Voltage Utilization for Single-Phase Neutral Point Clamped Three-Level Inverter

Fast and Accurate Neutral-Point Voltage Control Under Balanced and Unbalanced Neutral-Point Voltage for Coupled Ten-Switch Three-Phase Three-Level Inverter

A Simplified Space Vector Pulse Width Modulation Strategy for NPC Six-Phase Three-Level Inverter Considering Neutral-Point Potential Balancing

A virtual space vector modulation strategy for suppressing common-mode voltage in dual-output T-type three-level converters

Hybrid PWM Strategy of SVPWM and VSVPWM for NPC Three-Level Voltage-Source Inverter

A New Virtual Space Vector Modulation Technique Applied to the Ten-Switch Inverter for Common Mode Voltage Reduction

Common Mode Voltage Reduction and Neutral-Point Voltage Balance for Quasi-Z-Source Three-Level Neutral-Point-Clamped Inverters

Dc‐link capacitor voltage control for the NPC three‐level inverter with a newly MPC‐based virtual vector modulation

Common-Mode Voltage Reduction and Neutral Point Voltage Balance Modulation Technology of Quasi-Z-Source T-Type Three-Level Inverter

Space Vector Modulation Method for Simultaneous Common Mode Voltage and Circulating Current Reduction in Parallel Three-Level Inverters

Common-Mode Voltage Reduction Method for Three-Level Inverter With Unbalanced Neutral-Point Voltage Conditions

A Common-Mode Voltage Mitigation Method Based on the Universal PWM Algorithm for Neutral Point Clamped Converters