Abstract:This study focuses on the possibility of modular multilevel converter (MMC) loss optimisation by modulation without any additional circuit, where a common-mode voltage is injected into a nearest level modulator. Owing to the common-mode voltage injection, the proposed modulation strategy increases the fundamental voltage. Therefore, for a given voltage, operation is possible with the submodule (SM) voltage of at least one SM inserted each arm. This reduces the number of SMs required, resulting in reduction of conduction losses and leading to significant cost savings and/or returns on investment for facilities. Furthermore, the injection of common-mode voltage also decreases the total SM transitions, resulting in reduction of switching losses. The proposed modulation strategy is valid under both normal and unbalanced ac fault conditions for MMCs. The common-mode voltage extraction method is provided and its harmonic components are extracted. Then, the SM saving capability of the injection-based nearest level modulation is discussed and the SM saving limit is presented in relation with modulation indexes. The optimisation of both conduction losses and switching losses is analysed. The effectiveness of the proposed modulation strategy under both normal and unbalanced ac fault condition is verified by simulations of a 101-level three-phase MMC in MATLAB/Simulink.

A Common-Mode Voltage Mitigation Method Based on the Universal PWM Algorithm for Neutral Point Clamped Converters

Common Mode Voltage Suppression for Three-Level Neutral Point-Clamped Inverters

Common Mode Voltage Reduction and Neutral-Point Voltage Balance for Quasi-Z-Source Three-Level Neutral-Point-Clamped Inverters

A Carrier-Based Common-Mode Voltage Elimination Method for Back-to-Back Three-Level NPC Converters

A Simple Method for Common-Mode Voltage Reduction and Neutral-Point Potential Balance of Back-to-Back Three-Level NPC Converters

A Common-Mode Voltage Elimination Approach Based on Modulation Signal Decomposition for the Three-Level Back-to-Back Converter

A Simple Common-Mode Voltage Reduction Method Based on Zero-Sequence Voltage Injection for a Back-to-Back Three-Level NPC Converter

A Neutral-Point Potential Balancing Control Method with Third Harmonic Injected Pulse Width Modulation for Three-Level Converters

A Generalized Carrier-Overlapped PWM Method for Neutral-Point-Clamped Multilevel Converters

A Modulation Technique of Neutral Point Clamped Converters with Common-Mode Voltage Reduction and Neutral-Point Potential Balance

A Modified Carrier-Based PWM Strategy for Common Mode Voltage Elimination and Neutral Point Voltage Balance in a Unidirectional Three-Level Converter for AC Motor Drives

Common‐mode Voltage Injection‐based Nearest Level Modulation with Loss Reduction for Modular Multilevel Converters

Common-Mode Voltage Reduction Method for Three-Level Inverter With Unbalanced Neutral-Point Voltage Conditions

Common Mode Voltage and Neutral Point Potential Optimization Control for a Three-Level NPC Inverter

Novel Virtual Vector SVPWM Method to Mitigate Low-Frequency Common Mode Voltage for Four-Level NPC Inverters

CMV Suppression Method for Back-to-Back Three-level NPC Converter

New virtual space vector modultation scheme to eliminate common-mode voltage with balanced neutral-point voltage for three-level NPC Inverters

An Improved Reference Voltage Decomposition Method Based on Three-Level NPC ConvertersWith Neutral-Point Voltage Balancing and Common-Mode Voltage Reduction

An Active Virtual Space Vector Modulation Scheme for Three‐Level Neutral‐Point‐Clamped Converters

A Novel Virtual Space Vector Modulation With Reduced Common-Mode Voltage and Eliminated Neutral Point Voltage Oscillation for Neutral Point Clamped Three-Level Inverter

Common-Mode Voltage Reduction for Back-to-Back Two-Level Converters Based on Zero-Sequence Voltage Injection