Abstract:The modulation’s effects on the stator losses have been explored by previous studies. It confirms that the voltage vector error introduced by the PWM schemes dominants the PWM-related harmonic eddy-current loss and the PWM-related harmonic copper loss. However, the existing PWM schemes of two parallel inverter focus on the ZSCC peak reductions. They do not explore the reductions of the voltage vector error by the optimal vector sequences to suppress the stator loss. This paper aims to reduce the stator loss of the permanent magnet synchronous motor (PMSM) drive systems fed by the two parallel interleaved inverter with an optimal PWM scheme. First, this paper investigates the effects of the instantaneous voltage vector error, resulting from a PWM inverter, on the eddy-current loss and stator copper loss and reveals that a reduced voltage error reduces the eddy-current loss and stator copper loss. Then, this paper divides each 60° sector into six subsectors to minimize the voltage vector error, and with the proposed sector division, it further elects the optimal vector sequences for the subsectors, applying the minimum switching times per carrier period. Besides, the proposed optimal vector sequences are implemented through a simplified carrier-based method. The presented analysis confirms that the proposed PWM scheme can reduce the eddy-current loss, stator copper loss, and switching loss of the existing methods. Finally, the experimental results verify the theoretical analysis and optimal performance of the proposed modulation strategy.

Study on SVPWM Technique for the Switching Losses Reduction of Multi-modular Converter

Study and Simulation of Minimum Switching Losses VSVPWM Technique

Modified Single-Edge SVPWM Technique to Reduce the Switching Losses and Increase PWM Harmonics Frequency for Three-Phase VSIs

STUDY ON THE TRANSMITTING BANDWIDTH OF CARRIER PHASE SHIFTED SPWM

Switching Characterization and Power Loss Optimization for Modular Multiactive Bridge Converter under Common Phase Shift Control

Fast and Simple Space Vector Modulation Method for Multilevel Converters

Optimization Method for Space Vector Modulation of Matrix Converter

Reduced Switching-Frequency Modulation and Circulating Current Suppression for Modular Multilevel Converters

Investigation of A New Five-Level SVPWM Modulation Method

Model Predictive Virtual Flux Control Method for Low Switching Loss Performance in Three-Phase AC/DC Pulse-width-Modulated Converters

The Research of Over-modulation Strategies for SVPWM Based on Classification Algorithm

Single Active Vector Pulse-width Modulation with Improved Harmonic and Dynamic Performance for Low Carrier Ratio Applications

Unified SVPWM Algorithm and Optimization for Single-Phase Three-Level NPC Converters

Amplitude Sampled Reference-Based Space Vector Pulse Width Modulation for Control of Voltage Source Converters

An SVPWM Method for Parallel Resonant DC-Link Inverter with the Smallest Loss in the Auxiliary Commutation Circuit

Simplified SVPWM That Integrates Overmodulation and Neutral Point Potential Control

A Hybrid PWM Scheme for Stator Loss Reduction of Two Parallel Interleaved Inverter-Fed PMSM Drive with a Minimized Switching Loss

Common-Mode Voltage Elimination of Multilevel Converters with Reduced Switching Loss Using Sawtooth Carrier-Based PWM

An Improved CPS-SPWM and Unified Modulation Strategy for Multilevel Converter

Application of SVPWM Overmodulation Technique in Wind Power Converters

Space Vector Modulation of Multilevel Inverters with Online Vector Identification and Reduced Switching Losses for HEV/EV Applications