Abstract:The combination of five-level converters with selective harmonic elimination pulse-width modulation (SHEPWM) is a practical need in medium-voltage, high-power applications. However, how to suppress the common-mode voltage (CMV) in this case becomes a difficult problem. Although CMV suppression under high switching frequency (SF) modulations and three-level SHEPWM has been discussed in many studies, these methods are not applicable to five-level SHEPWM. This is partly because the zero-sequence voltage under SHEPWM is difficult to adjust and partly because the solution spaces of three- and five-level SHEPWM are completely different. Moreover, conventional CMV suppression in three-level SHEPWM must sacrifice the switching angles to control the zero-sequence voltage, which makes the equivalent SF increase. Therefore, in this article, we propose a novel CMV suppression method that effectively utilizes the multimode characteristics of five-level SHEPWM. Multimode characteristics refers to the output waveform containing different levels of jump patterns. Therefore, there are a large number of switching angle trajectories in five-level SHEPWM, which outputs the same fundamental voltage with different CMVs. The proposed method uses the special multimode characteristics to reduce the CMV without sacrificing the switching angles. Its effectiveness and feasibility are verified by experiments.

Common-Mode Voltage Elimination of Multilevel Converters with Reduced Switching Loss Using Sawtooth Carrier-Based PWM

Review on Pulse-Width Modulation Strategies for Common-Mode Voltage Reduction in Three-Phase Voltage-Source Inverters

Common-Mode Voltage Suppression of a Five-Level Converter Based on Multimode Characteristics of Selective Harmonic Elimination PWM

Common‐mode Voltage Injection‐based Nearest Level Modulation with Loss Reduction for Modular Multilevel Converters

Sawtooth Carrier-Based PWM Methods With Common-Mode Voltage Reduction for Symmetrical Multiphase Two-Level Inverters With Odd Phase Number

A Common-Mode Voltage Elimination Scheme by Reference Voltage Decomposition for Back-to-Back Two-Level Converters

Improved PWM Modulation Strategy for CHB Multilevel Converter

A Novel Modulation Scheme and a DC-Link Voltage Balancing Control Strategy for T-Type H-Bridge Cascaded Multilevel Converters

A Modified Carrier-Based PWM Strategy for Common Mode Voltage Elimination and Neutral Point Voltage Balance in a Unidirectional Three-Level Converter for AC Motor Drives

Reduction of Common-Mode Voltage in Multiphase Two-Level Inverters Using SPWM with Phase-Shifted Carriers

Impedance-Balancing-based Modulation Strategy for Common-Mode Noise Elimination of CHB Converter

Common-Mode Voltage Reduction for Back-to-Back Two-Level Converters Based on Zero-Sequence Voltage Injection

A Generalized Selective Harmonic Elimination PWM Formulation With Common-Mode Voltage Reduction Ability for Multilevel Converters

A Hybrid Modular Multilevel Converter Topology with an Improved Nearest Level Modulation Method

New Modulation Strategies for Hybrid Cascaded Multilevel Converter

A Common-Mode Voltage Mitigation Method Based on the Universal PWM Algorithm for Neutral Point Clamped Converters

Common-Mode Voltage Reduction Method for Three-Level Inverter With Unbalanced Neutral-Point Voltage Conditions

Synchronized CBPWM Strategy with Optimized Common-Mode Voltage for Three-Level Inverter at Low Carrier Ratio

A Common-Mode Voltage Elimination Approach Based on Modulation Signal Decomposition for the Three-Level Back-to-Back Converter

Common-mode Voltage Analysis and Suppression in Five-Level Modular Composited Converter

Common-Mode Voltage Reduction Scheme for MMC With Low Switching Frequency in AC–DC Power Conversion System