Abstract:This article presents an 18 similar to 30 GHz vector-sum phase shifter for wireless application in the millimeter-wave regime. It is composed of an I/Q signal generator, two variable-gain amplifiers (VGA), and a digital-to-analog converter with a quadrant selector. To attain wideband quadrature signal, a two-stage hybrid based on transformers is proposed to realize the I/Q signal generator. The first- and second-stage hybrids are designed with different resonating frequencies. As a result, the amplitude and phase errors of the I/Q signal generator are significantly decreased in a wide frequency band. In addition, theoretical analysis based on a simplified equivalent-circuit model is performed to guide the circuit implementation, and its correctness is demonstrated by electromagnetic simulation. To mitigate the impact of the VGAs' parasitics on the phase performance, a capacitive-neutralization technique is applied to cancel parasitics of transistors in the VGAs. A prototype circuit is designed using a 130-nm SiGe BiCMOS process. The measured results show that the circuit achieves a root-mean-square (RMS) amplitude error of less than 1.4 dB and an RMS phase error of 1.4 degrees similar to 3.4 degrees across 18 similar to 32 GHz. The tested peak gains of all the phase states are -1 similar to 4.5 dB with an input balun (approximate to 1.9 dB loss) and an output balun (approximate to 2 dB loss) at 22 GHz. Also, the input 1-dB compression point and noise figure are tested, which are >=-1 dBm and <= 15.5 dB in the targeting frequency band.

RF performance of rec-BCPW and arc-BCPW DMTL millimeter-wave phase shifters

A Novel Design Of Rf-Mems Phase Shifter Based On Bridge-Like Coplanar Waveguide

An Ultra Broadband Passive Vector Modulator Phase Shifter

A DMTL Phase Shifter Using Insulation Layer and Saw-Shaped CPW

Design of RF MEMS Phase Shifter Based on Saw-Shaped CPW

An 18 similar to 30 GHz Vector-Sum Phase Shifter With Two-Stage Transformer-Based Hybrid in 130-nm SiGe BiCMOS

An 18~30 GHz Vector-Sum Phase Shifter with Two-Stage Transformer-Based Hybrid in 130-Nm SiGe BiCMOS

RF characteristics investigation of MEMS phase shifter with CPW discontinuities

An E-band Subradix Active Phase Shifter with < 0.69° RMS Phase Error and 16-Db Attenuation in 28-Nm CMOS

An Improved Design for Ka-Band Phase Shifter Using Distributed MEMS Transmission Line Structure

An Improved Design for Ka-Band Phase ShifterUsing Distributed MEMS Transmission LineStructure

A Ka-band 3-bit RF MEMS switched line phase shifter implemented in coplanar waveguide

A Wafer-Scale Packaging for RF DMTL Phase Shifter

Modeling and Design of the Novel MEMS Phase Shifter for Ka Band Applications

A Novel Design for the MEMS Phase Shifter

A 1.7–2.7-GHz 4-bit Phase shifter based on packaged RF MEMS switches

Design and Consideration of Wafer Level Micropackaging for Distributed RF MEMS Phase Shifters

A Bulk Micromachined Distrubuted Digital Phase Shifter for Microwave Phased Array Applications

Wafer Level Micropackaging for Distributed Mems Phase Shifters

Design and Performance Analysis of Compact Printed Ridge Gap Waveguide Phase Shifters for Millimeter-Wave Systems