Abstract:This article presents a design method for a hybrid architecture 360 $^{\circ}$ phase shifter (PS) using a cascade of switched-type phase shifter (STPS) and reflection-type phase shifter (RTPS). A phase-shifted structure that switches between slot line and microstrip is proposed for STPS design, and a 3-dB quadrature coupler based on a capacitively loaded coupled line and parallel transmission line structure is proposed for RTPS design. Equivalent models and closed-form equations are presented for both structures. From the theoretical analysis, it can be found that the proposed phase-shifted structure can achieve a wider matching bandwidth and a lower in-band phase error as the phase-shift range (PSR) increases, which is contrary to the conventional STPS. For the quadrature coupler, a design method to reduce the amplitude difference and phase difference is obtained by theoretical analysis. To validate the proposed concept, a 90 $^{\circ}$ STPS, a quadrature coupler, an RTPS with greater than 90 $^{\circ}$ PSR, a 180 $^{\circ}$ PS with modified dc bias, and a continuously tunable 360 $^{\circ}$ PS were designed, fabricated, and measured. From measurement, the operating bandwidth, return loss (RL), in-band phase error, maximum rms phase error, maximum rms amplitude error, and circuit size of the proposed hybrid architecture 360 $^{\circ}$ PS are 1.7–2.28 GHz (29.1%), 10.5 dB, $\pm$ 4.46 $^{\circ}$ , 2.67 $^{\circ}$ , 0.24 dB, and 0.099 $\uplambda _{\text{g}}^{2}$ , respectively. The average insertion loss at the center frequency is 1.9 dB. The measured results demonstrate the validity of the proposed design method for continuously tunable 360 $^{\circ}$ PS with compact circuit size and low in-band phase error.

Analogue Phase Shifter Based on Stacked CBCPW

An Ultra Broadband Passive Vector Modulator Phase Shifter

29-/35 GHz Dual-band High-Gain Phase Shifter with Hybrid -Networks

An E-band Subradix Active Phase Shifter with < 0.69° RMS Phase Error and 16-Db Attenuation in 28-Nm CMOS

An 18~30 GHz Vector-Sum Phase Shifter with Two-Stage Transformer-Based Hybrid in 130-Nm SiGe BiCMOS

An 18 similar to 30 GHz Vector-Sum Phase Shifter With Two-Stage Transformer-Based Hybrid in 130-nm SiGe BiCMOS

Hybrid broadband high-precision phase shifter integrated circuit

Broadband Nonreciprocal Spoof Plasmonic Phase Shifter Based on Transverse Faraday Effects

A Wideband 6-Bit Phase Shifter with Low RMS Error in 65nm CMOS Technology

A 4-Bit CMOS Phase Shifter for Millimeter-Wave Phased Arrays

Design and Performance Analysis of Compact Printed Ridge Gap Waveguide Phase Shifters for Millimeter-Wave Systems

A Broad-Band Analog Phase Shifter Design on I-Q Vector Modulator

A 26-32Ghz 6-Bit Bidirectional Passive Phase Shifter with 14dbm IP1dB and 2.6° RMS Phase Error for Phased Array System in 40nm CMOS

A Ka-band 3-bit RF MEMS switched line phase shifter implemented in coplanar waveguide

A Ku-band 180° Phase Shifter with 2-Bit Attenuation Control Based on High-pass/low-pass Network

A 32-38Ghz Full-360° Low-Phase-Error 6-Bit Passive Phase Shifter in 0.15μm GaAs

A Bulk Micromachined Distrubuted Digital Phase Shifter for Microwave Phased Array Applications

A Ka-band 0/Π MEMS Phase Shifter

A Hybrid Architecture 360$^{\circ}$ Phase Shifter With Continuously Tunable Phase Shift and Low In-Band Phase Error

Design and Analysis of a 26–32-Ghz 6-Bit Passive Vector Modulation Phase Shifter for CMOS Bidirectional Transceiver

A 6-Bit CMOS Active Phase Shifter for Ku-Band Phased Arrays