Abstract:This article presents a design method for a hybrid architecture 360 $^{\circ}$ phase shifter (PS) using a cascade of switched-type phase shifter (STPS) and reflection-type phase shifter (RTPS). A phase-shifted structure that switches between slot line and microstrip is proposed for STPS design, and a 3-dB quadrature coupler based on a capacitively loaded coupled line and parallel transmission line structure is proposed for RTPS design. Equivalent models and closed-form equations are presented for both structures. From the theoretical analysis, it can be found that the proposed phase-shifted structure can achieve a wider matching bandwidth and a lower in-band phase error as the phase-shift range (PSR) increases, which is contrary to the conventional STPS. For the quadrature coupler, a design method to reduce the amplitude difference and phase difference is obtained by theoretical analysis. To validate the proposed concept, a 90 $^{\circ}$ STPS, a quadrature coupler, an RTPS with greater than 90 $^{\circ}$ PSR, a 180 $^{\circ}$ PS with modified dc bias, and a continuously tunable 360 $^{\circ}$ PS were designed, fabricated, and measured. From measurement, the operating bandwidth, return loss (RL), in-band phase error, maximum rms phase error, maximum rms amplitude error, and circuit size of the proposed hybrid architecture 360 $^{\circ}$ PS are 1.7–2.28 GHz (29.1%), 10.5 dB, $\pm$ 4.46 $^{\circ}$ , 2.67 $^{\circ}$ , 0.24 dB, and 0.099 $\uplambda _{\text{g}}^{2}$ , respectively. The average insertion loss at the center frequency is 1.9 dB. The measured results demonstrate the validity of the proposed design method for continuously tunable 360 $^{\circ}$ PS with compact circuit size and low in-band phase error.

A Hybrid Architecture 360$^{\circ}$ Phase Shifter With Continuously Tunable Phase Shift and Low In-Band Phase Error

Hybrid broadband high-precision phase shifter integrated circuit

29-/35 GHz Dual-band High-Gain Phase Shifter with Hybrid -Networks

An Ultra Broadband Passive Vector Modulator Phase Shifter

Compact 360 $^{\circ}$ Tunable Phase Shifter Using Reconfigurable Multiple Resonances with Dynamic Complex Matching

An 18~30 GHz Vector-Sum Phase Shifter with Two-Stage Transformer-Based Hybrid in 130-Nm SiGe BiCMOS

An E-band Subradix Active Phase Shifter with < 0.69° RMS Phase Error and 16-Db Attenuation in 28-Nm CMOS

A 360$^{\circ}$ Low Phase Error Tunable Phase Shifter With High-Pass and Low-Pass Networks Based on SISL

An 18 similar to 30 GHz Vector-Sum Phase Shifter With Two-Stage Transformer-Based Hybrid in 130-nm SiGe BiCMOS

A Broadband Digital Phase Shifter Using Phase-Slope Tuning Properties of Microstrip to Slotline Transition and Microstrip-Loaded Slotline Structure

A 22.5–33.5-Ghz Hybrid Phase Shifter with Low Phase and Amplitude Error for 5G and Satellite Communication

Systematic Design of a Broadband Reflective-Type Phase Shifter with Minimal Loss Variation and High Phase Accuracy

A 5-Bit Digital Phase Shifter Using Phase-Tuning Property of Open-/Short-Circuit Microstrip Line-Loaded Slot Line Structure

Analysis and Design of a 35-GHz Hybrid π-Network High-Gain Phase Shifter With 360° Continuous Phase Shifting

Ka-Band Reflective-Type Phase Shifter Using Multi-Resonant Loads and Digital Assistive Techniques

A 32-40 GHz 7-bit Bi-Directional Phase Shifter With 0.36 dB/1.6 RMS Magnitude/Phase Errors for Phased Array Systems

Inverted-E Type Phase Shifter Using Fixed Stub-Loaded Main Line: Enhanced Bandwidth and Phase Shift Range

Design of Ultraflat Phase Shifters Using Multiple Quarter-Wavelength Short-Ended Stubs

High Selectivity Wideband 180° Phase Shifters with the Functionality of Vertical Transition

Wideband Continuously Tunable Phase Shifter With Phase Slope Tunability and Low Phase Error

A 44-52 GHz Reflection-type Phase Shifter with 1.4° Phase Resolution in 28nm CMOS Process