Abstract:Neutron diffraction instruments offer a platform for materials science and engineering studies at extended temperature ranges far from ambient. As one of the widely used neutron sample environment types, cryogenic furnaces are usually bulky and complex, and they may need hours of beamtime overhead for installation, configuration, cooling, and sample change, etc. To reduce the overhead time and expedite experiments at the state-of-the-art high-flux neutron source, we developed a low-cost, miniature, and easy-to-use cryogenic environment (77–473 K) for in situ neutron diffraction. A travel-size mug serves for the environment where the samples sit inside. Immediate cooling and an isothermal dwell at 77 K are realized on the sample by direct contact with liquid N2 in the mug. The designed Al inserts serve as the holder of samples and heating elements, alleviate the thermal gradient, and clear neutron pathways. Both a single-sample continuous measurement and multi-sample high-throughput measurements are demonstrated in this environment. High-quality and refinable in situ neutron diffraction patterns are acquired on model materials. The results quantify the orthorhombic-to-cubic phase transformation process in LiMn2O4 and differentiate the anisotropic lattice thermal expansions and bond length evolutions between rhombohedral perovskite oxides with composition variation.

A Furnace to 1200 K for in Situ Heating X-Ray Diffraction, Small Angle X-Ray Scattering, and X-Ray Absorption Fine Structure Experiments

Small furnace for the small angle X-ray scattering (SAXS) and wide angle X-ray scattering (WAXS) characterization of the high temperature carbonization of coal

A Nearly Zero Temperature Gradient Furnace System for High Pressure Multi-Anvil Experiments

High-temperature furnace for in situ GISAXS studies

Furnace for Inelastic X-Ray Scattering from Liquids to 1600C

Isothermal furnace for long-term in situ and real-time X-radiography solidification experiments

Mirror Furnace for Synchrotron Dark Field X-ray Microscopy Experiments

Development of a microfurnace dedicated to in situ scanning electron microscope observation up to 1300 °C. II. Study of the thermal response of samples

The RAPTR furnace: a rapid heating and cooling sample furnace for in situ X‐ray scattering studies of temperature‐induced reactions

A novel method for experiments in a one-atmosphere box furnace

A Portable Miniature Cryogenic Environment for in Situ Neutron Diffraction

Laue microdiffraction on polycrystalline samples above 1500 K achieved with the QMAX‐μLaue furnace

A Sapphire Fiber Thermometer for High Temperature Measurement in Tundish Based on the Fast Fourier Transform

X Ray Diffraction With A Double Hot-Plate Laser-Heated Diamond Cell

Development of Simple Temperature Heating Station of D8 X-ray Diffractometer

A miniature X‐ray diffraction setup on ID20 at the European Synchrotron Radiation Facility

An Ultra-High Temperature Testing Instrument under Oxidation Environment Up to 1800 °C.

Medium-temperature furnace bake of Superconducting Radio-Frequency cavities at IHEP

Double-Sided Laser Heating System at Hpcat for in Situ X-Ray Diffraction at High Pressures and High Temperatures

Design of Furnace for Dynamic Fracture Experiment and Its Temperature Field Simulation

Experimental study of the effect of a radiant tube on the temperature distribution in a horizontal heating furnace