Abstract:In many physical experiments and applications with photomultiplier tubes (PMTs), high-speed pulse digitalization is used extensively. The current pulse from a PMT has a rising time of several to a hundred nanoseconds. The current pulse shape can be used to obtain the pulse energy and discriminate between different particles. The conventional readout system with a PMT uses the discrete or integrated pulse-shaping circuits and analogue-to-digital converter boards which are based on the NIM or VME system to implement the data acquisition function. In many applications, such as security instruments, there are only several PMTs used in the whole system, or in some distributed applications, long-distance analogue cable with high-voltage power cable is not applicable due to the tremendous number of channels and enormous distributed space. In this paper, an integrated digitizer base is designed and interfaced with a Cs2LiYCl6 (CLYC) scintillator with a PMT. The CLYC scintillator has the ability to realize the pulse shape discrimination (PSD) between the neutron and gamma-rays. There is only one Gigabit of unscreened twisted-pair cable needed for over 700 Mbps TCP data throughput and more than 10 W power. The boards of high voltage supply, current sensitive preamplifier, 500 MSPS/12-Bit ADC (Analog-to-Digital Converter), readout module based on ZYNQ SoC (System on Chip), power over Ethernet, and user interface circuits are stacked with board-to-board connectors. The system can achieve 4.6% gamma-ray energy resolution at 662 keV with a 20-{\mu}s pulse integral and PSD figure-of-merit of ~3.0 for the whole energy of neutrons and gamma-rays. This integrated digitizer base can also be interfaced with other detectors with a PMT.

Design of Prototyping PMT Electronic System for Daya Bay Reactor Neutrino Experiment

Prototype Design of Readout Electronics for In-Beam TOF-PET of Heavy-Ion Cancer Therapy Device

A Design Implementation of the Central Process Module for an In-Beam PET in HICTD

Design of the Local Trigger Board for the Daya Bay Reactor Neutrino Experiment

Design of trigger test board for the Daya Bay neutrino experiment

The Prototype Design of Integrated Base for PMT with Pulse Digitalization and Readout Electronics

Themuon system of the Daya BayReactor antineutrino experiment

Design of Waveform Digitizing Front-end Electronics for a Prototype Multi-purpose TPC at CSNS Back-n

Prototype of the Digital Hardware Trigger System for TAO Central Detector

Design and evaluation of prototype readout electronics for nuclide detector in Very Large Area Space Telescope

Title The detector system of the Daya Bay reactor neutrinoexperiment

The DAQ Ssystem and the Experiment Setup of the PMT Test System in CDEX-10

Prototype of Readout Electronics for GAEA Gamma Spectrometer of Back-n Facility at CSNS

Preliminary Design of Integrated Digitizer Base for Photomultiplier Tube

An underground cosmic-ray detector made of RPC

Readout System for a Prototype Multi-Purpose Time Projection Chamber at CSNS Back-n

Design and test for the CEPC muon subdetector based on extruded scintillator and SiPM

The PMT System of the TRIDENT Pathfinder Experiment

Design of a high-dynamic-range prototype readout system for VLAST calorimeter

Design of the PMT underwater cascade implosion protection system for JUNO

An improved design of the readout base board of the photomultiplier tube for future PandaX dark matter experiments